Sajjad Hazrati has investigated how PFAS behave in soils and treatment materials. The findings could help improve the remediation of contaminated sites.
23 October 2026
New knowledge could make PFAS treatment more effective
PFAS can persist in the environment for a very long time and are difficult to remove from contaminated soil and water. Researchers at Luleå University of Technology have shown how different PFAS behave in soils and treatment materials. The findings could help improve the selection and design of technologies for cleaning up PFAS-contaminated sites.
“There are many different PFAS, and they do not all behave in the same way. To choose an appropriate treatment method, we need to understand what determines whether they are retained by a material or continue to move with the water,” says Sajjad Hazrati, who recently defended his thesis in Waste Science and Technology at Luleå University of Technology.
Soil composition affects how PFAS move
In the thesis PFAS adsorption processes: from soil retention to remediation strategies, Sajjad Hazrati follows PFAS from their interactions with natural soil components and engineered materials to their removal using different treatment technologies.
The results show that organic carbon content alone cannot predict PFAS retention. Instead, the chemical composition of soil organic matter strongly influence PFAS sorption, together with contributions from mineral phases.
The research also reveals a two-way interaction. Soil organic matter affects how strongly PFAS are retained, while PFAS can enhance dissolved organic matter release, alter its chemical composition, and potentially influence its transport through soil.
“Soil is a complex system. Our results show that we need to understand both the properties of PFAS and the environment in which they occur to predict how they will move,” says Sajjad Hazrati.
The same treatment does not work everywhere
Another part of the research examines two materials used to remove PFAS from contaminated water: activated carbon and ion exchange resins. Both capture PFAS, but their performance is affected differently by other substances present in the water.
Organic matter in the water could, for example, reduce the ability of activated carbon to retain PFAS. Ion exchange resins showed greater selectivity for PFAS, including short-chain compounds that are often more difficult to remove, but were instead more sensitive to the presence of phosphate.
“A material that performs very well in one type of water may not perform equally well in another. The chemical composition of the water therefore needs to be considered when designing a treatment system,” he says.
This means that tests conducted under simplified laboratory conditions do not always provide the full picture of how a treatment technology will perform at an actual contaminated site.
Faster is not always better
Sajjad Hazrati also compared different reactor configurations for bringing PFAS-contaminated water into contact with treatment materials.
A rotating bed reactor significantly accelerated PFAS adsorption. For some PFAS, removal occurred several times faster than in conventional batch treatment, particularly for short-chain compounds.
However, a different picture emerged during longer-term operation. Conventional column systems retained PFAS for longer before the compounds began to break through the treatment material.
“This shows that rapid treatment and sustained treatment do not necessarily require the same system. The technology needs to be selected according to what the treatment is intended to achieve,” says Sajjad Hazrati.
From PFAS in soil to the right treatment strategy
The thesis connects what happens at a very small scale, when PFAS interact with different surfaces, with the performance of complete treatment systems.
The findings can help predict how PFAS move from contaminated sites and guide the selection of treatment materials and processes for different local conditions.
“PFAS remediation is not about finding one material or one technology that solves everything. We need to understand the combination of PFAS, water, soil and treatment system to design effective remediation,” says Sajjad Hazrati.
More information
Published:
Updated: