Malmbanan LKAB Tåg Vinter - Wikimedia Commons / David Gubler
View original picture , opens in new tab/window

Less friction, wear and cracks of railway rails

Published: 15 February 2019

The wear and cracks on the Swedish railways can decrease by 60 percent thanks to lubrication of the rail with friction controlling products. This shows new research at the Luleå Railway Research Center at Luleå University of Technology. The new research results may mean that the Swedish Transport Administration will be introducing a lubrication system on the iron ore line, the railway line that has Europe's heaviest train traffic.

The railway is an economical and environmentally friendly mode of transport for long distances and heavy loads. Today there is a demand for more capacity. In the short term, the existing network is expected to deliver the increased capacity. In order to achieve increased capacity without introducing double track, either the axle load or the number of trains (i.e. the annual gross tonnage) needs to be increased, which will decrease the life of the rail and thus increase the maintenance cost. The Iron ore line is of strategic interest to Sweden and the countries we export ore to.

"It is a so-called Top-of-the-Rail system that can become relevant, a train-borne variant of lubrication of the rail with a friction controlling product, instead of a more expensive stationary solution connected to the track itself. This results in reduced cracking and less noise as friction decreases. It also reduces noise levels", says Saad Ahmed Khan, Saad Ahmed Khan, PhD student in operation and maintenance engineering and Luleå Railway Research Center at Luleå University of Technology.

Saad Ahmed Khan 2019
Saad Ahmed Khan 2019

The system TOR-FM (Top-Of-Rail Friction-Modifier), has been tested in other countries with good results. But Saad Ahmed Khan also sees risks:

"With too much lubrication, the braking distances can be too long", says Saad Ahmed Khan.

The field results obtained using a handheld tribometer have shown that by using a TOR-FM, both the wear and the friction coefficients can be reduced. The content of the TOR-FM can have a significant effect on the carry distance and, generally, non-drying FMs have a longer carry distance.

In the media:

Saad Ahmed Khan

Khan, Saad Ahmed - Postdoctoral position

Organisation: Operation and Maintenance, Operation, Maintenance and Acoustics, Department of Civil, Environmental and Natural Resources Engineering
Phone: +46 (0)920 491402
Room: F111 - Luleå»

Tags