Staffan Lundström
Staffan Lundström

Staffan Lundström

Professor tillika ämnesföreträdare, Ämnesföreträdare
Luleå tekniska universitet
Strömningslära
Strömningslära och experimentell mekanik
Institutionen för teknikvetenskap och matematik
Staffan.Lundstrom@ltu.se
0920-492392
E802 Luleå

Employments

Current Employment

Professor in Fluid Mechanics May 2004 at Luleå University of Technology

The Professor of Fluid Mechanics at Luleå University of Technology (LTU) since 2008-07

Chair of Division of Fluid and Experimental Mechanics at LTU since 2011-03

 

Previous Employment

  • Professor, Lulea University of Technology, Sweden 040501 - 051231
  • Associate Professor, Lulea University of Technology, Sweden 000701 - 040430
  • Assistant Professor (Post-doc)Chalmers University of Technology, Sweden 961001 - 000703
  • Researcher Swedish Institute of Composites, Sweden 901101 - 960930
  • Engineer (part-time) Skellefteå hospital, Sweden 850401 - 911231

 

Parental Leave

One month during 2001

One month during 2005

Exams

  • PhD in Fluid Mechanics 27th February 1996 at Lulea University of Technology
    Thesis: Void formation and transport in manufacturing of polymer composites, 1996: 184D (ISSN 0348-8373). The Research was carried out at the Swedish Institute of Composites (SICOMP) Supervisers were Rikard Gebart and Håkan Gustavsson.
  • Docent in Polymeric Materials January 2001 at Chalmers University of Technology
    Title of presentation: Liquid flow through fibre networks: Simple or complex?
  • Professor in Fluid Mechanics May 2004 at Luleå University of Technology
    Title of presentation: Fluid flow with fibre networks: Simple or complex?

Supervision

 Mainsupervisor of PhD-students (additional as co-supervisor)

Student

Start

Lic

PhD

Title of thesis/project

Johan Håkanson

99-03

00-06

-

Liquid permeability of fibrous porous solids

Magnus Andersson

00-06

Yes

03-05

Visualisation of composites manufacturing

Daniel Marjavaara

01-11

Yes

06-11

CFD driven optimization of hydraulic turbine….

Markus Nordlund

03-02

Yes

06-11

Permeability modelling and particle deposition mechanisms

T. Odenberger

03-05

05-06

-

Compression Moulding of SMC, Visualisation….

Patrik Pettersson

03-03

06-06

09-06

Fluid flow through and deformation of wood fiber networks

Gunnar Hellström

05-02

07-02

09-11

Internal erosion in embankment dams: fluid flow

Sofie Högberg

06-06

08-05

10-12

Nanofiber transport and deposition in human airways

Anna-Lena Ljung

06-06

08-05

10-12

Modeling drying of iron ore pellets

Torbjörn Green

07-09

09-10

11-10

Particle image velocimetry in practice

Amir Jourak

09-02

11-06

13-03

Modeling flow and solute transport in packed beds Beds: Applications in On-site Wastewater Treatment Systems

Anders Andersson

08-06

10-11

13-06

Free and rough surface flow in the vicinity of hydropower plants

Ida Jansson

09-02

10-10

13-09

The effect of flowing water on turbine rotor vibrations

Sofia Larsson

09-02

11-09

14-04

Aerodynamics of grate kiln: Fundamentals

Jimmy Olsson

08-02

10-11

15-04

Compression moulding of SMC : experiments and simulation

Reine Granström

09-06

12-03

-

Modelling the Aerodynamics of Iron Ore Pelletizing Kilns

Per Burström

09-06

12-03

15-06

CFD Mod. of the SNCR Process in Iron Ore Grate-Kiln Plant

Shervin Khayamyan 

09-09

13-06

15-10

Transitional and turbulent flow through porous media

Patrick Jonsson

10-06

13-06

15-12

Smoothed Particle Hydrodynamics for Hydropower 

Samir Kumar Das

10-01

16-01

-

Ground water flows

Ammar Hazim Zaber

11-02

14-02

15-09

Pneumatic flow of bio-fuels

Elise Holmstedt

13-01

14-12

16-12

Flow of non-spherical particles

Linn Karlsson

13-09

15-12

20-02

Convective heat and mass transfer

Ziyang Teng

14-08

18-09

-

Modelling the Aerodynamics of Iron Ore Pelletizing Kilns

Sayeed Bin Assad

15-01

16-12

19-04

Attraction water

Emelie Wibron

15-08

18-04

 

Cooling of datacenter (A-L Ljung De-Facto Supervisor)

Gustaf Alnersson

17-12

20-03

 

Fibre orientation during compression moulding of SMC

Qiancheng Xie

17-12

19-05

 

Tidal rivers

Tobias Forslund

18-06

20-06

 

Flow in this porous media

   Guidance of post-docs & researchers

PhD

Start

Until

Main subject

L-G Westerberg

07-10

11-10

Grease rheology

Elianne Lindmark

08-12

10-12

Advanced experimental techniques in fluid mechanics

Vilnis Frishfelds

09-01

11-12

Modelling of particulate systems

Gunnar Hellström

10-01

17-02

Free surface and porous media flow

Anna-Lena Ljung

11-01

16-10

Convective heat and mass transfer

Anders Andersson

13-07

On-going

Environmental flows

Dzmitry Misiulia

14-09

15-08

Optimisation of cyclones

Sofia Larsson

14-05

On-going

Advanced experimental techniques in fluid mechanics

Nima Fallahjourbari

18-09

On-going

Thin porous media

Jingang Lu                        19-10  On-going          Process viscosity

Paper statistics (2019-11-10)

 

 > 300 papers of which 151 accepted in journals with peer review system, 2 Book chapters

Web of Science: No. 146   Times cited = 1838 (1307 wsc)          h-index = 22

Google Scholar: No. 351   Times cited = 3474,  i10-index = 89   h-index = 29 

 

 

External boards and panels

  • Member of the Swedish National Committee for Theoretical and App Mech, 2003-01-2008-12.
  • Secretary in the Swedish National Committee for Theoretical and App Mech, 2005-01-2008-12.
  • Member of the SICOMP AB board 2003-09-2006-03.
  • Member of Scientific Council, Nanofun-poly European Netw. of Ex. 2004-2008.
  • Member of the Faste Laboratory (A VINNOVA centre of Excellence) Executive committee 2007-01-.
  • Member of the evaluation panel for Mech Eng, Swedish Research Council 2007.
  • Member of the Int expert group for upstream migrating salmon, Umeriver 2007-2010.
  • Member of Swedish hydro power centre steering group on turbines and generators 2009-.
  • Swedish representative in IUTAMs general assembly 2009-.
  • One of eleven PIs in StandUp for energy, 2010-.
  • Member of the Royal Skytteanska Academy 2016-.

  • Member of the General Assembly of Hydroflex an H2020 project.

  • Leader of SP4 in EERA JP Hydropower

 

Assessment Committees and other Evaluations

  • Applications to 16 positions at Universities,
  • About 38 PhD-thesis (in 8 countries),
  • About 10 Licentiate-thesis,
  • Applications to the Swedish Research Council,
  • Application to the German Research Foundation and EPSRC UK,
  • Applications to Research Council Norway 2015-2018
  • On-site evaluation of application to National Research Council Canada 2016
  • Aplications to the Netherlands Organisation for Scientific Research 2018
  • Reviewer for a large number of journals.
  • The Volvo industrial PhD-student programme.

 

 

 

 

 

Internal duties and teaching

 

  • Member of the course committee for the School of Mechanical Engineering at Chalmers, 2000.
  • Completed LMI-course on Personal leadership November (2003). “Mentor programme” ongoing.
  • Completed three courses on pedagogical developments/supervising students.
  • Contributed to a successful application to a new nursery programme on radiography at Ltu, 2001.
  • Paper on implementation of journals in course in European Journal of Engineering Education.
  • Examiner/lecturer in composite materials, turbomachinery, applied mechanics, hydrodynamics, computational fluid mechanics, advanced fluid mechanics and several PhD courses.
  • Supervisor/examiner of a large numberf of student diploma works.
  • Project co-ordinator of a Nordic project (Nordic Industrial Fund) on composites with 11 industries and 4 institutes, Composites with RTM, 950201-960930.
  • Project co-ordinator of a Nordic project (nordtest) on measurement of the in-plane permeability with 4 partners, 970901-980831.
  • Responsible for research education at the Dep. of App. Phys. & Mech. Eng. about 100 PhD-students 2005-2008.
  • Member of the Executive committee of Dep of App Phys and Mech Eng, LTU 2007-08-2010-12.
  • Member of the Executive committee of Dep of Eng. Sci. and Math, LTU 2011-03-
  • Member of the board of Luleå University of Technology, 2011-02-.
  • Scientific director of the Research and innovation area “Smart Machines and Materials” 2013-04-

Responsibilities at conferences

  • Responsible for “Svenska mekanikdagar” 2007 in Luleå, Head of organisation Commitee.
  • Member of the Scientific Committee for: the 4th Int. Scientific Colloquium on Modelling for Material Processing, Riga, June 8-9, (2006)., the 2nd Int. Symp. on “Nanostructured and Functional Polymer-based Materials and Nanocomposites”, Lyon, France, May 29-31 (2006), the 3rd Int. Symp. on “Nanostructured and Functional Polymer- based Materials and Nanocomposites”, Corfu, Greece, May 13-15 (2007), the 9th Int. Conference on Flow Processes in Composite Materials, Montréal, Canada, July 10-14 (2008), the 6th Int. Scientific Colloquium on Modelling for Material Processing, Riga, Sept 16-17, (2010).
  • Member of the Local Organising Committee for ECCM-13, Stockholm, Sweden, June 2-5 (2008)

International Collaborations (examples)

 

  • Australia: Prof John Sheridan, Monash University, flow down-stream a fish attraction channel, formation of vortices(2010 – present): Prof Graham Nathan University of Adelaide, combustion and flow (2008 – present)
  • Latvia: Prof Andris Jacovics, Latvian University, Docent Vilnis Frishfelds, Leipaja University, flow in porous media (2003-present)
  • US: Prof Jonathan Freund, Univ. of Illinois at Urbana-Champaign fibre orientation (2007 – 2010)
  • Korea: Prof Wook Ryol Hwang, Gyeongsang National University, multiphase flow, 2012-, Prof Dong-Hyan Kim, Gyeongsang National University, multiphase flow, 2012-, wind-power
  • The Netherlands, Prof. Piet Lugt,SKF, Grease Rheology
     

Private Milestones

  • Married (-99), children (-98), (-00) and (-04)
  • First goal in Senior football-team Burträsk IK, (-83) The Swedish Cup. 1.56.03, 800m, Gävle, (-87). 2.04.43, Lidingöloppet, 30 km, (-89). 6.44.14, Vasaloppet, 90 km, (-95).
  • Asta Kask Jönköping (-84), Roskilde festival, (-86). U2, Josua Tree Tour at the hippodrome in Paris (-87).

Publikationer

Artikel i tidskrift

A Subgrid-Scale Model for Turbulent Flow in Porous Media (2019)

Joybari. N, Lundström. T
Transport in Porous Media, Vol. 129, nr. 3, s. 619-632
Artikel i tidskrift

A Subgrid-Scale Model for Turbulent Flow in Porous Media (2019)

Fallahjoybari. N, Lundström. S
Transport in Porous Media, Vol. 129, nr. 3, s. 619-632
Artikel i tidskrift

Evaporation of a sessile water droplet subjected to forced convection in humid environment (2019)

Ljung. A, Lundström. S
Drying Technology, Vol. 37, nr. 1, s. 129-138
Artikel i tidskrift

Numerical investigation of a hydropower tunnel (2019)

Estimating localised head-loss using the manning equation
Andersson. R, Hellström. J, Andreasson. P, Lundström. S
Water, Vol. 11, nr. 8
Artikel i tidskrift

Wall shear stress measurement on curve objects with PIV in connection to benthic fauna in regulated rivers (2019)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. J, Leonardsson. K
Water, Vol. 11, nr. 4
Artikel i tidskrift

A General Macroscopic Model for Turbulent Flow in Porous Media (2018)

Jouybari. N, Maerefat. M, Lundström. T, Eshagh Nimvari. M, Gholami. Z
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 140, nr. 1
Artikel i tidskrift

Characterization of Flow Structures Induced by Highly Rough Surface Using Particle Image Velocimetry, Proper Orthogonal Decomposition and Velocity Correlations (2018)

Andersson. L, Larsson. S, Hellström. J, Andreasson. P, Andersson. A, Lundström. S
Engineering, Vol. 10, s. 399-416
Konferensbidrag

Comparison of hard floor and raised floor cooling of servers with regards to local effects (2018)

Wibron. E, Ljung. A, Lundström. S
Ingår i: IECON 2018, 44th Annual Conference of the IEEE Industrial Electronics Society, 2018
Artikel i tidskrift

Computational Fluid Dynamics Modeling and Validating Experiments of Airflow in a Data Center (2018)

Wibron. E, Ljung. A, Lundström. S
Energies, Vol. 11, nr. 3
Artikel i tidskrift

Effect of Working Parameters of the Plate Heat Exchanger on the Thermal Performance of the Anti-Bact Heat Exchanger System to Disinfect Legionella in Hot Water Systems (2018)

Altorkmany. L, Kharseh. M, Ljung. A, Lundström. S
Applied Thermal Engineering, Vol. 141, s. 435-443
Artikel i tidskrift

Effects of deswirler position and its centre body shape as well as vortex finder extension downstream on cyclone performance (2018)

Misiulia. D, Antonyuk. S, Andersson. A, Lundström. T
Powder Technology, Vol. 336, s. 45-56
Artikel i tidskrift

Modelling heat transfer during flow through a random packed bed of spheres (2018)

Burström. P, Frishfelds. V, Ljung. A, Lundström. S, Marjavaara. B
Heat and Mass Transfer, Vol. 54, nr. 4, s. 1225-1245
Artikel i tidskrift

Modelling the dynamics of the flow within freezing water droplets (2018)

Karlsson. L, Ljung. A, Lundström. T
Heat and Mass Transfer, Vol. 54, nr. 12, s. 3761-3769
Artikel i tidskrift

Modelling transport and deposition of non-spherical micro- and nano-particles in composites manufacturing (2018)

Holmstedt. E, Åkerstedt. H, Lundström. S
Journal of reinforced plastics and composites (Print), Vol. 37, nr. 8, s. 507-519
Artikel i tidskrift

Numerical simulations of lubricating grease flow in a rectangular channel with and without restrictions (2018)

Sarkar. C, Westerberg. L, Höglund. E, Lundström. S
Tribology Transactions, Vol. 61, nr. 1, s. 144-156
Artikel i tidskrift

The Effect of Reynolds Number on Jet in Asymmetric Co-Flows (2018)

A CFD Study
Teng. Z, Larsson. S, Lundström. S, Marjavaara. B
International Journal of Chemical Engineering
Artikel i tidskrift

Tomographic PIV of flow through ordered thin porous media (2018)

Larsson. S, Lundström. S, Lycksam. H
Experiments in Fluids, Vol. 59, nr. 6
Artikel i tidskrift

Understanding morphodynamic changes of a tidal river confluence through field measurements and numerical modeling (2018)

Xie. Q, Yang. J, Lundström. S, Dai. W
Water, Vol. 10, nr. 10
Artikel i tidskrift

Discrete and continuous modelling of convective heat transport in a thin porous layer of mono sized spheres (2017)

Burström. P, Frishfelds. V, Ljung. A, Lundström. T, Marjavaara. D
Heat and Mass Transfer, Vol. 53, nr. 1, s. 151-160
Artikel i tidskrift

Effects of the inlet angle on the collection efficiency of a cyclone with helical-roof inlet (2017)

Misiulia. D, Andersson. A, Lundström. S
Powder Technology, Vol. 305, s. 48-55
Artikel i tidskrift

Experimental and Simulation Validation of ABHE for Disinfection of Legionella in Hot Water Systems (2017)

Altorkmany. L, Kharseh. M, Ljung. A, Lundström. S
Applied Thermal Engineering, Vol. 116, s. 253-265
Artikel i tidskrift

Experimental study of the flow past submerged half-cylinders (2017)

Bin Asad. S, Lundström. S, Andersson. A
AIP Conference Proceedings, Vol. 1851
Artikel i tidskrift

Flow in thin domains with a microstructure (2017)

Lubrication and thin porous media
Almqvist. A, Fabricius. J, Lundström. S, Wall. P
AIP Conference Proceedings, Vol. 1798
Artikel i tidskrift

Heat and mass transfer boundary conditions at the surface of a heated sessile droplet (2017)

Ljung. A, Lundström. S
Heat and Mass Transfer, Vol. 53, nr. 12, s. 3581-3591
Artikel i tidskrift

Large Eddy Simulation Investigation of an Industrial Cyclone Separator Fitted with a Pressure Recovery Deswirler (2017)

Misiulia. D, Andersson. A, Lundström. S
Chemical Engineering & Technology, Vol. 40, nr. 4, s. 709-718
Artikel i tidskrift

Lubricating grease flow in a double restriction seal geometry (2017)

a Computational Fluid Dynamics approach
Westerberg. L, Sarkar. C, Farré. J, Lundström. S, Höglund. E
Tribology letters, Vol. 65, nr. 3
Artikel i tidskrift

Measurements of Transitional and Turbulent Flow in a Randomly Packed Bed of Spheres with Particle Image Velocimetry (2017)

Khayamyan. S, Lundström. S, Hellström. G, Gren. P, Lycksam. H
Transport in Porous Media, Vol. 116, nr. 1, s. 413-431
Artikel i tidskrift

Modelling the Evaporation Rate in an Impingement Jet Dryer with Multiple Nozzles (2017)

Ljung. A, Andersson. R, Andersson. A, Lundström. S, Eriksson. M
International Journal of Chemical Engineering, Vol. 2017
Artikel i tidskrift

Numerical Investigation of Turbulent Flow through Rectangular and Biconvex Shaped Trash Racks (2017)

Åkerstedt. H, Eller. S, Lundström. S
Engineering, Vol. 9, nr. 5, s. 412-426
Artikel i tidskrift

Soot reduction in an entrained flow gasifier of biomass by active dispersion of fuel particles (2017)

Göktepe. B, Umeki. K, Hazim. A, Lundström. S, Gebart. R
Fuel, Vol. 201, s. 111-117
Artikel i tidskrift

Transitional and Turbulent Flow in a Bed of Spheres as Measured with Stereoscopic Particle Image Velocimetry (2017)

Khayamyan. S, Lundström. S, Gren. P, Lycksam. H, Hellström. G
Transport in Porous Media, Vol. 117, nr. 1, s. 45-67
Artikel i tidskrift

A Review of Particle Image Velocimetry for Fish Migration (2016)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. G
World Journal of Mechanics, Vol. 6, nr. 4, s. 131-149
Artikel i tidskrift

A stochastic two-scale model for pressure-driven flow between rough surfaces (2016)

Rafols. F, Larsson. R, Lundström. S, Wall. P, Almqvist. A
Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, Vol. 472, nr. 2190
Artikel i tidskrift

A validated CFD model for prediction of selective non-catalytic reduction of nitric oxide by cyanuric acid (2016)

Burström. P, Antos. D, Lundström. T, Marjavaara. D
Progress in Computational Fluid Dynamics, An International Journal, Vol. 16, nr. 2, s. 108-117
Artikel i tidskrift

Active fuel particles dispersion by synthetic jet in an entrained flow gasifier of biomass (2016)

Cold flow
Hazim. A, Göktepe. B, Umeki. K, Lundström. S, Gebart. R
Powder Technology, Vol. 302, s. 275-282
Artikel i tidskrift

An Experimental Study of Temperature Distribution in an Autoclave (2016)

Kluge. J, Lundström. S, Ljung. A, Westerberg. L, Nyman. T
Journal of reinforced plastics and composites (Print), Vol. 35, nr. 7, s. 566-578
Konferensbidrag

CFD Simulation of Jet Mixing with Asymmetric Co-flows in a Down-scaled Rotary Kiln Model (2016)

Teng. Z, Johansson. S, Larsson. S, Lundström. S, Marjavaara. D
Ingår i: Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, ASME Press, 2016, IMECE2016-65637
Konferensbidrag

CFD Simulations Comparing Hard Floor and Raised Floor Configurations in an Air Cooled Data Center (2016)

Wibron. E, Ljung. A, Lundström. S
Ingår i: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, 11-13 July 2016, s. 450-455, 2016
Artikel i tidskrift

Cold flow experiments in an entrained flow gasification reactor with a swirl-stabilized pulverized biofuel burner (2016)

Göktepe. B, Hazim. A, Gebart. R, Lundström. S
International Journal of Multiphase Flow, Vol. 85, s. 267-277
Konferensbidrag

Comparison of turbulence models when modeling the airflow in a data center (2016)

Wibron. E, Ljung. A, Lundström. S
Paper presented at : European Fluid Mechanics Conference : 13/09/2016 - 16/09/2016
Konferensbidrag

Computational Fluid Dynamics Modelling of Flow Field in a Simplified, Down-scaled Rotary Kiln Model (2016)

Teng. Z, Larsson. S, Lundström. S, Marjavaara. D
Paper presented at : 11th European Fluid Mechanics Conference, Seville Spain, 12-16 Sept 2016
Artikel i tidskrift

Darcy's law for flow in a periodic thin porous medium confined between two parallel plates (2016)

Fabricius. J, Hellström. G, Lundström. S, Miroshnikova. E, Wall. P
Transport in Porous Media, Vol. 115, nr. 3, s. 473-493
Konferensbidrag

Describing fish passage in a river confluence with telemetry and CFD (2016)

Andersson. A, Leonardsson. K, Lindberg. D, Lundström. S, Hellström. G, Lundqvist. H
Paper presented at : International Symposium on Ecohydraulics : 07/02/2016 - 12/02/2016
Artikel i tidskrift

Influence of Inertial Particles on Turbulence Characteristics in Outer and Near Wall Flow as Revealed with High Resolution PIV (2016)

Hazim. A, Lundström. S, Hellström. G
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 138, nr. 9
Artikel i tidskrift

Modeling Transport and Deposition Efficiency of Oblate and Prolate Nano- and Micro-particles in a Virtual Model of the Human Airway (2016)

Holmstedt. E, Åkerstedt. H, Lundström. S, Högberg. S
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 138, nr. 8
Artikel i tidskrift

Modelling Heat Transfer Inside an Autoclave (2016)

Effect of Radiation
Kluge. J, Lundström. S, Westerberg. L, Nyman. T
Journal of reinforced plastics and composites (Print), Vol. 35, nr. 14, s. 1126-1142
Artikel i tidskrift

Numerical Computation of Macroscopic Turbulent Quantities in a Porous Medium (2016)

an Extemsion to a macroscopic Turbulent model
Fallahjoybari. N, Lundström. S, Hellström. G, Maerefat. M, Nimvari. M
Journal of Porous Media, Vol. 19, nr. 6, s. 497-513
Konferensbidrag

PIV measurements within a randomly packed bed of spheres (2016)

Khayamyan. S, Lundström. S, Lycksam. H, Gren. P, Hellström. G
Paper presented at : Interpore 2016 : 8th International Conference on Porous Media & Annual Meeting 09/05/2016 - 12/05/2016
Konferensbidrag

Simulation and experiments of entrance flow conditions to a fishway (2016)

Hellström. G, Andersson. A, Leonardsson. K, Lycksam. H, Lundström. S, Lundqvist. H
Paper presented at : International Symposium on Ecohydraulics : 07/02/2016 - 12/02/2016
Artikel i tidskrift

Simulation of the flow field in an iron ore pelletizing kiln (2016)

Larsson. S, Marjavaara. D, Lundström. S
Minerals & metallurgical processing, Vol. 33, nr. 3, s. 144-148
Artikel i tidskrift

Smoothed Particle Hydrodynamic Simulation of Hydraulic Jump using Periodic Open Boundaries (2016)

Jonsson. P, Andreasson. P, Hellström. G, Jonsén. P, Lundström. S
Applied Mathematical Modelling, Vol. 40, nr. 19-20, s. 8391-8405
Artikel i tidskrift

Vacuum infusion of cellulose nanofibre network composites (2016)

Influence of porosity on permeability and impregnation
Aitomäki. Y, Moreno. S, Lundström. S, Oksman. K
Materials & design, Vol. 95, s. 204-211
Konferensbidrag

Velocity distribution measurements in a fishway like open channel by Laser Doppler Anemometry (LDA) (2016)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. G
Paper presented at : Experimental Fluid Mechanics : 17/11/2015 - 20/11/2015
Artikel i tidskrift

A CFD-based evaluation of Selective Non-Catalytic Reduction of Nitric Oxide in iron ore grate-kiln plants (2015)

Burström. P, Antos. D, Lundström. T, Marjavaara. D
Progress in Computational Fluid Dynamics, An International Journal, Vol. 15, nr. 1, s. 32-46
Artikel i tidskrift

Calculation of Kiln Aerodynamics with two RANS turbulence models and by DDES (2015)

Larsson. S, Lundström. T, Marjavaara. D
Flow Turbulence and Combustion, Vol. 94, nr. 4, s. 859-878
Artikel i tidskrift

Compression moulding of sheet moulding compound (2015)

Modelling with computational fluid dynamics and validation
Kluge. J, Lundström. T, Westerberg. L, Olofsson. K
Journal of reinforced plastics and composites (Print), Vol. 34, nr. 6, s. 479-492
Artikel i tidskrift

Computational Investigation of an Industrial Cyclone Separator with Helical-Roof Inlet (2015)

Misiulia. D, Andersson. A, Lundström. S
Chemical Engineering & Technology, Vol. 38, nr. 8, s. 1425-1434
Artikel i tidskrift

Effects of the inlet angle on the flow pattern and pressure drop of a cyclone with helical-roof inlet (2015)

Misiulia. D, Andersson. A, Lundström. S
Chemical engineering research & design, Vol. 102, s. 307-321
Artikel i tidskrift

Evaluation of Guiding Device for Downstream Fish Migration with In-field Particle Tracking Velocimetry and CFD (2015)

Lundström. T, Rahkola. M, Ljung. A, Hellström. J, Green. T
Journal of Applied Fluid Mechanics, Vol. 8, nr. 3, s. 579-589
Artikel i tidskrift

Influence of plate size on the evaporation rate of a heated droplet (2015)

Ljung. A, Lindmark. E, Lundström. S
Drying Technology, Vol. 33, nr. 15-16, s. 1963-1970
Artikel i tidskrift

Interaction between the flow in two nearby pores within a porous material during transitional and turbulent flow (2015)

Khayamyan. S, Lundström. T
Journal of Applied Fluid Mechanics, Vol. 8, nr. 2, s. 281-290
Artikel i tidskrift

Modelling Dam Break Evolution over a Wet Bed with Smoothed Particle Hydrodynamics (2015)

A Parameter Study
Jonsson. P, Jonsén. P, Andreasson. P, Lundström. S, Hellström. G
Engineering, Vol. 7, nr. 5, s. 248-260
Artikel i tidskrift

Modelling of a groundwater mound in two-dimensional heterogeneous unconfined aquifer in response to precipitation recharge (2015)

Das. S, Ganesh. S, Lundström. T
Journal of hydrologic engineering, Vol. 20, nr. 7
Artikel i tidskrift

PIV/PLIF experiments of jet mixing in a model of a rotary kiln (2015)

Larsson. S, Johansson. S, Lundström. T, Marjavaara. D
Experiments in Fluids, Vol. 56, nr. 5
Artikel i tidskrift

The Flow Field in a Virtual Model of a Rotary Kiln as a Function of Inlet Geometry and Momentum Flux Ratio (2015)

Larsson. S, Lundström. T, Marjavaara. D
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 137, nr. 10
Konferensbidrag

The impact of a fixed contact angle on a freezing water droplet (2015)

Karlsson. L, Ljung. A, Lundström. S
Paper presented at : Svenska Mekanikdagar 2015 : 10/06/2015 - 12/06/2015
Konferensbidrag

The influence of a fixed contact angle on a freezing water droplet (2015)

Karlsson. L, Ljung. A, Lundström. S
Paper presented at : Droplets 2015 : 06/10/2015 - 08/10/2015
Artikel i tidskrift

Turbulent modulation in particulate flow: A review of critical variables (2015)

Hazim. A, Lundström. S, Hellström. G
Engineering, Vol. 7, nr. 10, s. 597-609
Konferensbidrag

Vacuum Infusion of Nanocellulose Networks of Different Porosity (2015)

Aitomäki. Y, Moreno. S, Lundström. S, Oksman. K
Ingår i: 20th International Conference on Composite Materials, Copenhagen, 19-24th July 2015, ICCM, 2015, 4109-1
Artikel i tidskrift

Challenges and opportunities within simulation-driven functional product development and operation (2014)

Special Session: Product Development for Through-Life Engineering Services
Pavasson. J, Ljung. A, Karlberg. M, Larsson. S, Johansson. S, Lundström. T
Procedia CIRP, Vol. 22, s. 169-174
Konferensbidrag

Comparison of three turbulence models in the modeling of kiln aerodynamics (2014)

Larsson. S, Lundström. T, Marjavaara. D
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Design of test rig for visualizations of cylindrical shear and pressure driven Couette flow using μPIV (2014)

Li. J, Westerberg. L, Höglund. E, Lundström. T
Paper presented at : International Conference on Experimental Fluid Mechanics : 12/08/2014 - 15/08/2014
Artikel i tidskrift

Effect of spatial resolution of rough surfaces on numerically computed flow fields with application to hydraulic engineering (2014)

Andersson. A, Hellström. J, Andreasson. P, Lundström. T
Engineering Applications of Computational Fluid Mechanics, Vol. 8, nr. 3, s. 373-381
Artikel i tidskrift

Enhancing the reliability of laboratory phosphorus filter tests: effect of influent properties and interpretation of effluent parameters (2014)

Herrmann. I, Jourak. A, Hedström. A, Lundström. T, Viklander. M
Water, Air and Soil Pollution, Vol. 225, nr. 1
Artikel i tidskrift

Experimental investigation of transitional flow in porous media with usage of a pore doublet model (2014)

Khayamyan. S, Lundström. T, Gustavsson. H
Transport in Porous Media, Vol. 101, nr. 2, s. 333-348
Konferensbidrag

Experimental study of the effect from bio-solid particles on fully developed turbulent duct flow (2014)

Hazim. A, Lundström. T, Hellström. J
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Artikel i tidskrift

Flow-induced deformations within random packed beds of spheres (2014)

Frishfelds. V, Hellström. J, Lundström. T
Transport in Porous Media, Vol. 104, nr. 1, s. 43-56
Artikel i tidskrift

Gas and particle flow in a spray roaster (2014)

Johansson. S, Westerberg. L, Lundström. T
Journal of Applied Fluid Mechanics, Vol. 7, nr. 2, s. 187-196
Konferensbidrag

Grade of geometric resolution of a rough surface required for accurate prediction of pressure and velocities in water tunnels (2014)

Andersson. R, Andersson. A, Andreasson. P, Hellström. J, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Grate aerodynamic (2014)

Model strategies for gas flow through a 2D iron ore pellet bed
Burström. P, Frishfelds. V, Ljung. A, Lundström. T, Marjavaara. D
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Grease free surface flow on a rotating plate (2014)

Li. J, Westerberg. L, Höglund. E, Lundström. T
Paper presented at : Nordic Symposium on Tribology : 10/06/2014 - 13/06/2014
Konferensbidrag

Influence of internal natural convection on water droplets freezing on cold surfaces (2014)

Karlsson. L, Ljung. A, Lundström. T
Paper presented at : International Symposium on Convective Heat and Mass Transfer : 08/06/2014 - 13/06/2014
Konferensbidrag

Influence of internal natural convection on water droplets freezing on cold surfaces (2014)

Karlsson. L, Ljung. A, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Influence of plate size on the evaporation rate of a heated droplet (2014)

Ljung. A, Lindmark. E, Lundström. T
Paper presented at : International Drying Symposium : 24/08/2014 - 27/08/2014
Konferensbidrag

Measurement and simulation of turbulent flow over rough surface (2014)

Sam. A, Andersson. A, Szász. R, Hellström. G, Lundström. S, Revstedt. J
Paper presented at : Nordic Seminar on Computational Mechanics : 22/10/2014 - 24/10/2014
Konferensbidrag

Modeling evaporation of droplets on a heated plate (2014)

Ljung. A, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Artikel i tidskrift

Numerical derivation of dispersion coefficients for flow through three-dimensional randomly packed beds of monodisperse spheres (2014)

Jourak. A, Frishfelds. V, Hellström. J, Lundström. T
AIChE Journal, Vol. 60, nr. 2, s. 749-761
Konferensbidrag

Numerical study of the heat and mass transfer conditions at the surface of a heated droplet (2014)

Ljung. A, Lundström. T
Paper presented at : International Symposium on Convective Heat and Mass Transfer : 08/06/2014 - 13/06/2014
Konferensbidrag

Representative volume size when modelling flow through porous structures (2014)

Hellström. J, Forsberg. F, Lundström. T, Sjödahl. M
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Shear flow and free surface effects generated by a surface-piercing plate (2014)

Westerberg. L, Lindqvist. S, Sheridan. J, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Konferensbidrag

Simulation of the movements and deposition rates of oblate and prolate nano- and microparticles in a virtual model of the human airways (2014)

Holmstedt. E, Åkerstedt. H, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Artikel i tidskrift

An asymptotic approach of Brownian deposition of nanofibres in pipe flow (2013)

Åkerstedt. H, Högberg. S, Lundström. T
Theoretical and Computational Fluid Dynamics, Vol. 27, nr. 5, s. 561-575
Artikel i tidskrift

CFD-modelling and validation of free surface flow during spilling of reservoir in down-scale model (2013)

Andersson. A, Andreasson. P, Lundström. T
Engineering Applications of Computational Fluid Mechanics, Vol. 7, nr. 1, s. 159-167
Konferensbidrag

Contaminant particle migration in a double restriction seal (2013)

Baart. P, Green. T, Li. J, Lundström. T, Westerberg. L, Höglund. E, et al.
Ingår i: Proceedings of the STLE Annual Meeting and Exhibition 2013, Detroit MI, USA., s. 125, STLE, 2013
Konferensbidrag

Grease flow modeling using micro particle image velocimetry (2013)

Westerberg. L, Lundström. T, Green. T, Höglund. E, Li. J, Lugt. P, et al.
Ingår i: Svenska mekanikdagar 2013, s. 106, Lunds tekniska högskola, 2013
Artikel i tidskrift

Longitudinal dispersion coefficient (2013)

effects of particle-size distribution
Jourak. A, Frishfelds. V, Hellström. J, Lundström. T, Herrmann. I, Hedström. A
Transport in Porous Media, Vol. 99, nr. 1, s. 1-16
Konferensbidrag

Lubricating grease shear flow and boundary layers in a concentric cylinder configuration (2013)

Li. J, Westerberg. L, Höglund. E, Lundström. T, Baart. P, Lugt. P
Ingår i: Proceedings of the 3rd International Tribology Symposium of IFoMM (International Federation for the Promotion of Mechanism and Machine Science), Luleå, March 19-21, 2013, 2013