Toppbilder - publikationer
Visa originalbild , Öppnas i nytt fönster/flik

Publikationer byggkonstruktion

Publicerad: 12 maj 2011

Publikationer

Artikel i tidskrift

A multi-level strategy for successively improved structural analysis of existing concrete bridges (2019)

examination using a prestressed concrete bridge tested to failure
Bagge. N, Plos. M, Popescu. C
Structure and Infrastructure Engineering, Vol. 15, nr. 1, s. 27-53
Artikel i tidskrift

Brash ice growth model (2019)

development and validation
Riska. K, Bridges. R, Shumovskiy. S, Thomas. C, Coche. E, Bonath. V, et al.
Cold Regions Science and Technology, Vol. 157, s. 30-41
Artikel i tidskrift

Post-installed shear connectors (2019)

Fatigue push-out tests of coiled spring pins
Hällmark. R, Collin. P, Hicks. S
Journal of constructional steel research, Vol. 153, s. 298-309
Artikel i tidskrift

Strengthening Bridges with Postinstalled Coiled Spring Pin Shear Connectors (2019)

State-of-the-Art Review
Hällmark. R, Jackson. P, Collin. P, White. H
Practice Periodical on Structural Design and Construction, Vol. 24, nr. 1
Artikel i tidskrift

A predictive environmental assessment method for construction operations (2018)

Application to a Northeast China case study
Feng. K, Lu. W, Olofsson. T, Chen. S, Yan. H, Wang. Y
Sustainability, Vol. 10, nr. 11
Artikel i tidskrift

Activation of a Raw Clay by Mechanochemical Process (2018)

Effects of Various Parameters on the Process Efficiency and Cementitious Properties
Tole. I, Habermehl-Cwirzen. K, Rajczakowska. M, Cwirzen. A
Materials, Vol. 11, nr. 10
Artikel i tidskrift

Alkali activation of a high MgO GGBS (2018)

fresh and hardened properties
Humad. A, Provis. J, Cwirzen. A
Magazine of Concrete Research, Vol. 70, nr. 24, s. 1256-1264
Artikel i tidskrift

An Integrated Environment–Cost–Time Optimisation Method for Construction Contractors Considering Global Warming (2018)

Feng. K, Lu. W, Chen. S, Wang. Y
Sustainability, Vol. 10, nr. 11
Kapitel i bok, del av antologi

Assessment and Loading to Failure of Three Swedish RC Bridges (2018)

Nilimaa. J, Sabau. C, Bagge. N, Puurula. A, Sas. G, Blanksvärd. T, et al.
Ingår i: Evaluation of Concrete Bridge Behavior through Load Testing
Artikel i tidskrift

Axially Loaded RC Walls with Cutout Openings Strengthened with FRCM Composites (2018)

Sabau. C, Popescu. C, Sas. G, Blanksvärd. T, Täljsten. B
Journal of composites for construction, Vol. 22, nr. 6, s. 04018046-1-04018046-16
Artikel i tidskrift

Bond Strength between Glass Fiber Fabrics and Low Water-to-Binder Ratio Mortar (2018)

Experimental Characterization
Bohling. D, Cwirzen. A, Habermehl-Cwirzen. K
Advances in Civil Engineering / Hindawi, Vol. 2018
Konferensbidrag

Bridges tested to failure in Sweden (2018)

Täljsten. B, Blanksvärd. T, Sas. G, Bagge. N, Nilimaa. J, Popescu. C, et al.
Ingår i: IABSE Conference 2018 – Engineering the Past, to Meet the Needs of the FutureJune 25-27 2018, Copenhagen, Denmark, 2018
Artikel i tidskrift

Calcium chloride acceleration in ordinary Portland cement (2018)

Vehmas. T, Anna. K, Cwirzen. A
Magazine of Concrete Research, Vol. 70, nr. 16, s. 856-863
Artikel i tidskrift

Estimation of specific surface area of particles based on size distribution curve (2018)

Ghasemi. Y, Mats. E, Cwirzen. A
Magazine of Concrete Research, Vol. 70, nr. 10, s. 533-540
Artikel i tidskrift

Failure tests on concrete bridges (2018)

Have we learnt the lessons?
Bagge. N, Popescu. C, Elfgren. L
Structure and Infrastructure Engineering, Vol. 14, nr. 3, s. 292-319
Artikel i tidskrift

Finite element analysis of shear deformation in reinforced concrete shear-critical beams (2018)

Huang. Z, Lu. Z, Song. S, Tu. Y, Blanksvärd. T, Sas. G, et al.
Structure and Infrastructure Engineering, Vol. 14, nr. 6, s. 791-806

Publikationer

Artikel i tidskrift

Measuring incident heat flux and adiabatic surface temperature with plate thermometers in ambient and high temperatures (2019)

Wickström. U, Anderson. J, Sjöström. J
Fire and Materials, Vol. 43, nr. 1, s. 51-56
Doktorsavhandling, sammanläggning

The life safety objective in structural fire safety design (2019)

Sandström. J
Artikel i tidskrift

Influence of cold-formed angle on high strength steel material properties (2018)

Tran. A, Bernspång. L, Veljkovic. M, Rebelo. C, Simões da Silva. L
Advanced steel construction
Artikel i tidskrift

Resistance of cold-formed high strength steel angles (2018)

Tran. A, Bernspång. L, Veljkovic. M, Rebelo. C, Simões da Silva. L
Advanced steel construction
Artikel i tidskrift

Stability analysis of newly developed polygonal cross-sections for lattice wind towers (2018)

Wind Engineering, Vol. 42, nr. 4, s. 353-363
Artikel i tidskrift

Technical comment (2018)

ten fundamental principles on defining and expressing thermal exposure as boundary conditions in fire safety engineering
Wickström. U, Hunt. S, Lattimer. B, Barnett. J, Beyler. C
Fire and Materials, Vol. 42, nr. 8, s. 985-988
Artikel i tidskrift

Temperature of post-flashover compartment fires (2018)

calculations and validation
Byström. A, Wickström. U
Fire and Materials, Vol. 42, nr. 3, s. 255-265
Artikel i tidskrift

The effect of thermochromic coatings of VO2 on the fire performance of windows (2018)

Ochoterena. R, Försth. M
Fire and Materials, Vol. 42, nr. 7, s. 873-876
Artikel i tidskrift

Timber under Real Fire Conditions (2018)

the influence of oxygen content and gas velocity on the charring behavior
Schmid. J, Santomaso. A, Brandon. D, Wickström. U, Frangi. A
Journal of Structural Fire Engineering, Vol. 9, nr. 3, s. 222-236
Konferensbidrag

Catenary action in single storey industrial halls subjected to localized fires (2017)

Iqbal. N, Fodor. J, Sandström. J, Heistermann. T, Veljkovic. M
Ingår i: Proceedings of the 7th International Conference on Mechanics and Materials in Design (M2D), s. 1627-1628, INEGI-FEUP, 2017
Artikel i tidskrift

Cylindrical shell buckling under a hydraulic constraint (2017)

Numerical study
Sabau. G, Koltsakis. E, Lagerqvist. O
ce/papers, Vol. 1, nr. 2-3, s. 970-979
Artikel i tidskrift

Determination of stress intensity factors for cracked bridge roller bearings using finite element analyses (2017)

Noury. P, Eriksson. K
Engineering Fracture Mechanics, Vol. 169, s. 67-73
Artikel i tidskrift

Erratum to: Contribution of CNTs/CNFs morphology to reduction of autogenous shrinkage of Portland cement paste (2017)

Blandine. F, Habermehl-Cwirzen. K, Cwircen. A
Frontiers of Structural and Civil Engineering, Vol. 11, nr. 2, s. 255-255
Artikel i tidskrift

Failure analysis of martensitic stainless steel bridge roller bearings (2017)

Noury. P, Eriksson. K
Engineering Failure Analysis, Vol. 79, s. 1017-1030
Artikel i tidskrift

Failures of high strength stainless steel bridge roller bearings (2017)

A review
Noury. P, Eriksson. K
Engineering Fracture Mechanics, Vol. 180, s. 315-329
Artikel i tidskrift

Influence of execution tolerances for friction connections in circular and polygonal towers for wind converters (2017)

Heistermann. C, Pavlovic. M, Veljkovic. M, Pak. D, Feldmann. M, Rebelo. C, et al.
Advanced steel construction, Vol. 13, nr. 4, s. 343-360
Artikel i tidskrift

Measurement of kinetics and thermodynamics of the thermal degradation for flame retarded materials (2017)

application to EVA/ATH/NC
Girardin. B, Fontaine. G, Duquesne. S, Försth. M, Bourbigot. S
Journal of Analytical and Applied Pyrolysis, Vol. 124, s. 130-148
Konferensbidrag

Monitoring of a bridge strengthened with post-installed coiled spring pins (2017)

Hällmark. R, Collin. P, Petersson. M, Andersson. E
Ingår i: IABSE Symposium, Vancouver, 2017, Engineering the Future, s. 1201-1208, IABSE - International Association for Bridges and Structural Engineering, 2017