Mobilt labb - Mätutrustning

Maria Ask

Ask, Maria - Professor

Organisation: Applied Geochemistry, Geosciences and Environmental Engineering, Department of Civil, Environmental and Natural Resources Engineering
Phone: +46 (0)920 491411
Room: F849 - Luleå»
Daniel Ask

Ask, Daniel - Adjunct Professor

Organisation: Exploration Geophysics, Geosciences and Environmental Engineering, Department of Civil, Environmental and Natural Resources Engineering

Innovative deep drilling for rock stress measurements

Published: 22 April 2016

Luleå University of Technology has received fundings for national infrastructure from the Swedish Research Council to build a national resource for rock stress measurements. The equipment is unique in the world and allows three-dimensional rock stress determination down to 3 kilometer deep boreholes.

It will primarily be used in projects that are generated within the Swedish Scientific Drilling Program (SSDP) and the International Continental Drilling Program (ICDP), but it will also be used in more applied projects.

Several types of applied projects

The state of stress affects the rock mass stability and permeability. Therefore, knowledge about the state of stress is of the great importance for the vast majority of rock engineering projects at greater depth. 

–  This knowledge is important for several types of applied projects, such as the analysis of the safety of the repository of spent nuclear fuel, geothermal energy, carbon dioxide storage in bedrock and stability calculations for various types of manmade underground structures, says Maria Ask, Professor of Applied Geology at Luleå University of Technology.

Source: LTU
Photo: R Renberg
Length of video: 1:01

3 kilometers depth into bedrock

Daniel Ash, Adjunct Professor in Exploration Geophysics Photo: Tomas Bergman
Daniel Ash, Adjunct Professor in Exploration Geophysics Photo: Tomas Bergman

–  The technology we use downhole called hydraulic fracturing. With a pair of seal packers we part of the borehole. Then we pump carefully into water under high pressure and measures the pressure when the rock wall cracks or an old crack open. Using a electrical imager then we measure the crack orientation, sais Daniel Ask, professor in exploration geophysics at Luleå University of Technology.

Daniel Ask will work as a project manager in the places where bergspänningsmätnignarna be performed.

Advanced technology

The rock stress measurements equipment consists of two main parts, measuring equipment in the borehole and data collection device on the surface. Three versions of the instrumentation in the borehole is being constructed to enable measurements in three different borehole diameters, 122, 96 and 76 mm. The challenge is to design the measuring devices so it fit in the slim boreholes while being robust enough. Above ground, the surface system is installed in a steel container that is mounted on on a 13 meter long trailer. The container also holds ​ three winches which have 3 km long steel tubing and logging wire that connects the borehole equipment with the surface system.

The equipment is being built at the university

Most of the equipment in the borehole built at Luleå University of Central workshop but the project also includes a research collaboration with the University of Strasbourg in France.

–  I have worked here at the central workshop since 1973 and this is the biggest task I have experienced, all categories. There is also a project where all of our skills and experience will be tested and challenged, says research engineer Tommy Nilsson, Luleå University of Technology.

The stress trailer tested and verified (June-July 2018)

The infrastructure at LTU now includes state-of-the-art equipment for hydraulic rock stress measurements.

The stress trailer has been developed at LTU in cooperation with, among others, the University of Strasbourg and Geosigma AB. The Swedish Research Council and LTU have funded the project, with in-kind support from Geosigma AB and FracSinus Rock Stress Measurements AB. 

The first stress measurement campaign was conducted in the summer of 2018. Testing occurred in a 1.2 km long borehole of Posiva Oy in Olkiluoto, Finland.

Photo: Daniel Ask
The stress trailer on-route to the test site in Finland. Photo: Daniel Ask
Photo: Daniel Ask
The final distance to the test site was a narrow forest road. Photo: Daniel Ask
Photo: Daniel Ask
Mobilization at test site with Tommy Nilsson (LTU) to the left and István Lazányi (Fox Automatic, Hungary) to the right. Photo: Daniel Ask
Maria Ask

Ask, Maria - Professor

Organisation: Applied Geochemistry, Geosciences and Environmental Engineering, Department of Civil, Environmental and Natural Resources Engineering
Phone: +46 (0)920 491411
Room: F849 - Luleå»
Daniel Ask

Ask, Daniel - Adjunct Professor

Organisation: Exploration Geophysics, Geosciences and Environmental Engineering, Department of Civil, Environmental and Natural Resources Engineering

Tags