1. Ali Hedayati, Saeed Asghari, Bagher Faghihimani, Morteza Koosha, “A coating with high corrosion resistance and low interfacial contact resistance for metallic bipolar plates of PEM fuel cells”, registered in Patent Organization of IRAN for 20 years, Patent Number: 83780, 16 December 2013.
2. Ali Hedayati, Farnoosh Forouzan, Abbas Najafizadeh, Ahmad Kermanpur, Rouhallah Surki, “The Process to produce a new generation of AISI304L austenitic stainless steel with high strength and good elongation by the creation of Nano grain size structure”, registered in Patent Organization of IRAN for 20 years, Patent Number: 65371, 26 May 2010.
II. Journal Articles
1. Suopajärvi, H.; Umeki, K.; Mousa, E.; Hedayati, A.; Romar, H.; Kemppainen, A.; Wang, C.; Phounglamcheik, A.; Tuomikoski, S.; Norberg, N., et al. Use of biomass in integrated steelmaking – status quo, future needs and comparison to other low-co2 steel production technologies. Applied Energy 2018, 213, 384-407.
2. Vuorinen, E.; Heino, V.; Ojala, N.; Haiko, O.; Hedayati, A. Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2017, 232, 3-13.
3. Forouzan F, Gunasekaran S, Hedayati A, Vuorinen E, Mücklich F. Microstructure analysis and mechanical properties of Low alloy High strength Quenched and Partitioned Steel. Solid State Phenomena. 2017;258:574-8.
4. Hedayati A, Asghari S, Alinoori AH, Koosha M, Vuorinen E. Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC. Iranian Journal of Hydrogen & Fuel Cell. 2016;3(2):137-49.
5. Surkialiabad R, Hedayati A, Alam AS. Monitoring of Martensitic Transformation in Cold-Rolled 304L Austenitic Stainless Steel by Eddy Current Method. Transformation. 2013;2(10):11.
6. Surkialiabad R, Hedayati A. Similar Tendency to Strain Induced Martensite Transformation in Different Austenitic Stainless Steels. Materials Performance and Characterization. 2013;2(1):206-13.
7. Forouzan F, Kermanpur A, Najafizadeh A, Hedayati A. Processing of Nano/submicron Grained Stainless Steel 304L by an Advanced Thermomechanical Process. International Journal of Modern Physics: Conference Series. 2012;5:383-90.
8. Hedayati A, Najafizadeh A, Kermanpur A, Forouzan F. The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel. Journal of Materials Processing Technology. 2010;210(8):1017-22.
9. Forouzan F, Najafizadeh A, Kermanpur A, Hedayati A, Surkialiabad R. Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process. Materials Science and Engineering: A. 2010;527(27–28):7334-9.
10. Forouzan F, Najafizadeh A, Kermanpur A, Hedayati A. Artificial Neural Network Models for Production of Nano-Grained Structure in AISI 304l Stainless Steel by Predicting Thermo-Mechanical Parameter. International Journal of Iron and Steel Society of Iran. 2009;6:6-13.
III. Conference Papers with Proceedings
- Hedayati A, Lindgren R, Boman C, Skoglund N, Öhman M, Ash transformation during single-pellet combustion of agricultural biomass fuels – focus on K and P. In The 27th International Conference on the Impact of Fuel Quality on Power Production and the Environment, 24-28 September 2018, Lake Louise, AB, Canada.
- Forouzan F, Gunasekaran S, Hedayati A, Vuorinen E, Mücklich F, "Microstructure analysis and mechanical properties of Low alloy High strength Quenched and Partitioned Steel", Eighth International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 27-29 June 2016, Brno, Czech Republic.
- E. Vuorinen, Heino V, N. Ojala, O. Haiko, A. Hedayati, "The effects of microstructure on erosive-abrasive wear behavior of carbide free bainitic and boron steels", The 17th Nordic Symposium on Tribology - NORDTRIB 2016, 14-17 June 2016, Aulanko, Hämeenlinna, Finland.
- Hedayati A, Asghari S, Alinouri A, "Corrosion behavior and interfacial contact resistance of TiN coated type 316L stainless steel as bipolar plate for proton exchange membrane fuel cell", 6th Iranian fuel cell Seminar, 12-13 March 2013, Shahid Rajaee Teacher Training University, Tehran, Iran.
- Torabpour A, Khorasani MR, Asghari S, Hedayati A, "Review process to manufacture metallic bipolar plates in proton exchange membrane fuel cell", The 2nd Conference on Hydrogen and Fuel Cell, 2-3 May 2012, K. N. Toosi University of Technology, Tehran, Iran.
- Surki R, Hedayati A, "Temperature dependency of strain induced martensitic transformation in metastable austenitic stainless steels", The first international the sixth joint conference of Iranian metallurgical engineering society and Iranian foundry men's society IMES2012, school of metallurgy and materials engineering, college of engineering, University of Tehran, 6-8 November 2012, school of metallurgy and materials engineering, college of engineering, University of Tehran, Iran.
- Hedayati A, Asghari S, Alinouri A, "An Investigation on contact resistance and corrosion properties of AISI 316L stainless steel as bipolar plate in proton exchange membrane fuel cell", The 2nd Conference on Hydrogen and Fuel Cell,, 2-3 May 2012, K. N. Toosi University of Technology, Tehran, Iran.
- Hedayati A, Asghari S, Alinoori A, "An Investigation on Corrosion properties and contact resistance of TiN coating on AISI 316L stainless steel as bipolar plate in proton exchange membrane fuel cell", The 2nd Conference on Hydrogen and Fuel Cell, 2-3 May 2012, K. N. Toosi University of Technology, Tehran, Iran.
- Forouzan F, Najafizadeh A, Kermanpur A, Hedayati A, "Naural network simulation of mechanical properties and ultrafine grain refinment of AISI 304L stainless steel through the martensite reversion process", Steel Symposium 2010, 2-3 March 2010, Iron alloy steel company, Yazd, Iran.
- Forouzan F, Kermanpur A, Najafizadeh A, Hedayati A, "Effects of anealing conditions for developing ultrafine/nano grained 304l stainless steel by artificial neural network modeling", 3nd International Congress on Nanoscience and Nanotechnology, 9-11 November 2010, University of Shiraz, Shiraz, Iran.
- Hedayati A, Najafizadeh A, Kermanpur A, Forouzan F, "Submicron Microstructure Achieved by Thermomechanical Process in Metastable Austenitic Stainless Steel AISI 304L", Steel Symposium 2009 3–4 March 2009, Shahid Chamran University, Ahvaz, Iran.
- Hedayati A, Forouzan F, Najafizadeh A, Kermanpur A, Surki R, "Effect of Cold Work percent on Mechanical Properties of AISI 304L Stainless Steel", The 9th Iranian Conference on Manufacturing engineering 3–5 March 2009, University of Birjand, Birjand, Iran.
- Forouzan MR, Kermanpur A, Forouzan F, Hedayati A, Jalali MR, "Numerical Simulation of Temperature History and Phase Transformations during Submerged Direct Seam Welded Pipes of steel X70", 2nd International conference of pipe Tech, 2009, Tehran, Iran.
- Forouzan F, Kermanpur A, Najafizadeh A, Hedayati A, "Processing of Nano/Submicron Grained Stainless Steel 304L by an Advanced Thermomechanical Process", 2nd International Conference on Ultrafine Grained and Nanostructured Materials, 14-15 November 2009, Center of Excellence for High Performance Materials, School of Metallurgy and Materials Engineering, University College of Engineering, University of Tehran, Iran.
- Hoseyni M, Salekbafghi M, Shamanian M, Hedayati A, "Coating of MoSi2 on the plain steel substrates by TIG Cladding", Steel Symposium 2008, 18–20 February 2008, Bandarabas, Iran.
- Hedayati A, Forouzan F, Najafizadeh A, Kermanpur A, "An Advanced Thermomechanical Process to Obtain Nano/Submicron Grain Sizes in a Metastable Austenitic Stainless Steel", 2nd International Congress on Nanoscience & Nanotechnology, 28–30 October 2008, University of Tabriz, Tabriz, Iran.
- Haerian B, Najafizadeh A, Kermanpur A, Hedayati A, "The effect of cold deformation – annealing process on grain size of austenitic stainless steel AISI 304", Steel Symposium 2008, 18–20 February 2008, Bandarabas, Iran.
IV. Papers in preparation
1. A. Hedayati, S. Asghari, “A Modified Method for Measuring Interfacial Contact Resistance between Gas Diffusion Layer and Bipolar Plate”, to be submitted.
1. Translated to Persian by A. Kermanpur, A. Hedayati, F. Forouzan, S. Ghaziof:
“Nanomaterials, Nanotechnology and Design”, Michael F. Ashby, Paulo J. Ferreira, Daniel
L. Schodek, Elsevier, 2009. ISBN: 978-0-7506-8149-0 (In Press).