Andreas Lennartsson
Andreas Lennartsson

Andreas Lennartsson

Senior Lecturer, Head of Division
Luleå University of Technology
Process Metallurgy
Minerals and Metallurgical Engineering
Department of Civil, Environmental and Natural Resources Engineering
andreas.lennartsson@ltu.se
+46 (0)920 492379
F1326 Luleå

Research

My research area is mainly within base metal metallurgy with focus on process modeling and distribution of minor elements. The overall aim of the research is to find wise process routes for varying feedstock in base metal extraction. My approach is to use process modeling based on thermodynamics together with characterization of material and experimental work.

 

Teaching

I am course coordinator for the second cycle course Process Metallurgy where I also teach extraction of base metals. I am also a teacher in the first cycle course High Temperature Processes where I teach mass- and heat balances, thermodynamic diagrams and solution thermodynamics. Supervision of student projects as well as master theses is also part of my teaching.

Background

In October 2015, I obtained my PhD degree in Process Metallurgy from Luleå University of Technology. My thesis is entitled “Wise Process Routes for Varying Feedstock in Base Metal Extraction”. I also have a M.Sc. degree in Chemical Engineering with specializing in Chemical and Biochemical Engineering from Luleå University of Technology obtained in 2005.

Publications

Article in journal

A Mineralogical Investigation of Sintering in Cu-Rich Polymetallic Concentrates During Roasting in Inert Atmosphere (2020)

Prasad. P, Lennartsson. A, Samuelsson. C
Metallurgical and materials transactions. B, process metallurgy and materials processing science
Article in journal

Effect of the Ash from H2‐Rich Carbonaceous Materials on the Physicochemical Properties of Raceway Slag and Coke Reactivity (2020)

Ahmed. H, Sideris. D, Lennartsson. A, Prasad. P, Sundqvist Ökvist. L, From. L, et al.
Steel Research International
Article in journal

Minimizing Chromium Leaching from Low-Alloy Electric Arc Furnace (EAF) Slag by Adjusting the Basicity and Cooling Rate to Control Brownmillerite Formation (2020)

Strandkvist. I, Pålsson. K, Andersson. A, Olofsson. J, Lennartsson. A, Samuelsson. C, et al.
Applied Sciences, Vol. 10, nr. 1, s. 35-50
Conference paper

A dialogue about teaching and learning metallurgy in Finland and Sweden (2019)

Heikkinen. E, Lennartsson. A
Paper presented at : PedaForum 2019, 5-6 June 2019, Helsinki, Finland
Article in journal

Evaluating the potential of plastic-containing materials as alternative reducing agents (2019)

Lotfian. S, Vikström. T, Lennartsson. A, Björkman. B, Ahmed. H, Samuelsson. C
Canadian metallurgical quarterly, Vol. 58, nr. 4, s. 389-399