Skip to content
Pär Jonsén
Pär Jonsén

Pär Jonsén

Professor and Head of Subject, Head of Division
Luleå University of Technology
Solid Mechanics
Solid Mechanics
Department of Engineering Sciences and Mathematics
Par.Jonsen@ltu.se
+46 (0)920 493460
E866 Luleå

Work summary

Research is focused on non-linear finite element simulation, particle based methods like smoothed particle hydrodynamics (SPH) and particle finite element method. Main application areas are modelling of different granular processes, fluid structure interaction, silo problems and pulp. Powder compaction, milling of minerals and development of experimental methods are common problems. Main areas are development of material models, energy based crack models, damage in green bodies, crack energy measurements and studying of stress fields in the powder pressing process. Combining of different numerical methods into global physically realistic models are an important area of research. Residual stress fields, green strength and density distributions in green bodies are also studied.

Publications

Article in journal

A statistical DEM approach for modelling heterogeneous brittle materials (2022)

Wessling. A, Larsson. S, Jonsén. P, Kajberg. J
Computational Particle Mechanics, Vol. 9, nr. 4, s. 615-631
Conference paper

A Testing Methodology for Hot Rolled High Strength Steels Under Warm Forming Conditions (2022)

Larsson. F, Oldenburg. M, Jonsén. P
Part of: Hot Sheet Metal Forming of High-Performance Steel: proceedings, s. 411-418, Wissenschaftliche Scripten, 2022
Article in journal

Calibration of orthotropic plasticity- and damage models for micro-sandwich materials (2022)

Hammarberg. S, Kajberg. J, Larsson. S, Moshfegh. R, Jonsén. P
SN Applied Sciences, Vol. 4, nr. 6
Conference paper

Effect of cutting clearance and sandblasting on fatigue of thick CP800 steel sheets for heavy-duty vehicles (2022)

Gustafsson. D, Parareda. S, Jonsén. P, Kajberg. J, Olsson. E
Part of: Hot sheet metal forming of high-performance steel, s. 315-322, 2022
Conference paper

Impact crash tests of high-strength steels using 3D high-speed digital image correlation and finite element analysis (2022)

Jonsson. S, Jonsén. P, Kajberg. J
Part of: 8th International Conference Hot Sheet Metal Forming of High-Performance Steel CHS2: May 30th - June 2nd, 2022, Barcelona, Spain, s. 119-126, Verlag Wissenschaftliche Scripten, 2022
Conference paper

Impact crash tests using high-speed 3D digital image correlation (2022)

Jonsson. S, Jonsén. P, Kajberg. J
Part of: Svenska Mekanikdagar 2022, Luleå: Luleå tekniska universitet, Sweden, June 15-16, 2022, Luleå tekniska universitet, 2022
Article in journal

Implicit or explicit time integration schemes in the PFEM modeling of metal cutting processes (2022)

Rodriguez. J, Larsson. S, Carbonell. J, Jonsén. P
Computational Particle Mechanics, Vol. 9, nr. 4, s. 709-733
Article in journal

Mechanical Characterization of Highly Heterogeneous Brittle Materials by Optical Techniques (2022)

Suarez. L, Kajberg. J, Forsberg. F, Jonsén. P
Minerals Engineering, Vol. 185
Conference paper

Mechanical characterization of slag by optical techniques: A case of study (2022)

Suarez. L, Jonsén. P, Kajberg. J
Part of: Svenska Mekanikdagar 2022, Luleå tekniska universitet, 2022
Conference paper

Modelling Rock Fracture using the Stochastic Bonded Discrete Element Method (2022)

Wessling. A, Larsson. S, Jonsén. P, Kajberg. J
Paper presented at : World Congress of Computational Mechanics, Yokohama
Conference paper

A Brittle and Heterogeneous Bonded Discrete Element Model of Wide Applicability (2021)

Wessling. A, Larsson. S, Jonsén. P, Kajberg. J
Paper presented at : Swedish Mechanical Days
Conference paper

A Multi-Physics Approach for Modelling of Stirred Media Mills (2021)

Larsson. S, Rodríguez Prieto. J, Heiskari. H, Jonsén. P
Paper presented at : VII International Conference on Particle-based Methods (PARTICLES 2021), Hamburg, Germany, October 4-5, 2021
Article in journal

A Novel Particle-Based Approach for Modeling a Wet Vertical Stirred Media Mill (2021)

Larsson. S, Rodríguez Prieto. J, Heiskari. H, Jonsén. P
Minerals, Vol. 11, nr. 1
Conference paper

A Statistical Bonded Discrete Element Model for heterogeneous brittle materials (2021)

Wessling. A, Larsson. S, Jonsén. P, Kajberg. J
Paper presented at : VII International Conference on Particle-based Methods (Particles 2021), Hamburg/Online, Germany, October 4-6, 2021
Article in journal

Full-scale simulation and validation of bucket filling for a mining rope shovel by using a combined rigid FE-DEM granular material model (2021)

Svanberg. A, Larsson. S, Mäki. R, Jonsén. P
Computational Particle Mechanics, Vol. 8, s. 825-843
Article in journal

Full-Scale Simulation and Validation of Wear for a Mining Rope Shovel Bucket (2021)

Svanberg. A, Larsson. S, Mäki. R, Jonsén. P
Minerals, Vol. 11, nr. 6
Article in journal

Micromechanical and multi-scale modeling of manganese containing slag comminution in the design of energy efficient secondary raw material beneficiation processes (2021)

Lindroos. M, Andersson. T, Laukkanen. A, Suarez. L, Kajberg. J, Jonsén. P, et al.
Minerals Engineering, Vol. 170
Article in journal

Novel Methodology for Experimental Characterization of Micro-Sandwich Materials (2021)

Hammarberg. S, Kajberg. J, Larsson. S, Moshfegh. R, Jonsén. P
Materials, Vol. 14, nr. 16
Article in journal

Stating failure modelling limitations of high strength sheets (2021)

Implications to sheet metal forming
Sandin. O, Jonsén. P, Frómeta. D, Casellas. D
Materials, Vol. 14, nr. 24
Article in journal

The particle finite element method for transient granular material flow (2021)

modelling and validation
Larsson. S, Rodriguez Prieto. J, Gustafsson. G, Häggblad. H, Jonsén. P
Computational Particle Mechanics, Vol. 8, nr. 1, s. 135-155