Staffan Lundström
Staffan Lundström

Staffan Lundström

Professor and Head of Subject, Chaired Professor
Luleå University of Technology
Fluid Mechanics
Fluid and Experimental Mechanics
Department of Engineering Sciences and Mathematics
Staffan.Lundstrom@ltu.se
+46 (0)920 492392
E802 Luleå

Employments

Current Employment

Professor in Fluid Mechanics May 2004 at Luleå University of Technology

The Professor of Fluid Mechanics at Luleå University of Technology (LTU) since 2008-07

Chair of Division of Fluid and Experimental Mechanics at LTU since 2011-03

 

Previous Employment

  • Professor, Lulea University of Technology, Sweden 040501-051231
  • Associate Professor, Lulea University of Technology, Sweden 000701-040430
  • Assistant Professor (Post-doc) Chalmers University of Technology, Sweden 961001-000703
  • Researcher Swedish Institute of Composites, Sweden 901101-960930
  • Engineer (part-time) Skellefteå Hospital, Sweden 850401-911231

 

Parental Leave

One month During 2001

One month During 2005

Exams

  • PhD in Fluid Mechanics 27th February 1996 at Lulea University of Technology
    Thesis: Void formation and transport in manufacturing of polymer composites, 1996: 184D (ISSN 0348-8373). The Research was carried out at the Swedish Institute of Composites (SICOMP) Supervisers were Rikard Gebart and Håkan Gustavsson.
  • Docent in Polymeric Materials January 2001 at Chalmers University of Technology
    Title of presentation: Liquid flow through fibre networks: Simple or complex?
  • Professor in Fluid Mechanics May 2004 at Luleå University of Technology
    Title of presentation: Fluid flow with fibre networks: Simple or complex?

Supervision

Main supervisor of PhD-students (additional as co-supervisor)

 

 

Student

Start

Lic

PhD

Title of thesis/project

Johan Håkanson

99-03

00-06

-

Liquid permeability of fibrous porous solids

Magnus Andersson

00-06

Yes

03-05

Visualisation of composites manufacturing

Daniel Marjavaara

01-11

Yes

06-11

CFD driven optimization of hydraulic turbine….

Markus Nordlund

03-02

Yes

06-11

Permeability modelling and particle deposition mechanisms

T. Odenberger

03-05

05-06

-

Compression Moulding of SMC, Visualisation….

Patrik Pettersson

03-03

06-06

09-06

Fluid flow through and deformation of wood fiber networks

Gunnar Hellström

05-02

07-02

09-11

Internal erosion in embankment dams: fluid flow through and..

Sofie Högberg

06-06

08-05

10-12

Modeling nanofiber transport and deposition in human airways

Anna-Lena Ljung

06-06

08-05

10-12

Modeling drying of iron ore pellets

Torbjörn Green

07-09

09-10

11-10

Particle image velocimetry in practice

Amir Jourak

09-02

11-06

13-03

Modeling flow and solute transport in packed beds Beds: Applications in On-site Wastewater Treatment Systems

Anders Andersson

08-06

10-11

13-06

Free surface flow in regulated rivers

Ida Jansson

09-02

10-10

13-09

The effect of flowing water on turbine rotor vibrations

Jimmy Olsson

08-02

10-11

13-10

Compression moulding of SMC : experiments and simulation

Sofia Larsson

09-02

11-09

13-12

Aerodynamics of grate kiln: Fundamentals

Reine Granström

09-06

12-03

-

Modelling the Aerodynamics of Iron Ore Pelletizing Kilns

Per Burström

09-06

12-03

14-06

CFD Mod. of the SNCR Process in Iron Ore Grate-Kiln Plant

S Khayamyan

09-09

13-06

-

Fundamentals of flow through porous media

Samir Kumar Das

10-01

13-12

-

Ground water flows

Ammar Hazim Zaber

11-02

13-12

-

Pneumatic flow of bio-fuels

Elise Holmstedt

13-01

14-03

-

Flow of non-spherical particles

 

 

 

 

 

Guidance of post-docs, research assistants and researchers

 

 

 

PhD

Start

Until

Main subject

L-G Westerberg

07-10

11-10

Grease rheology

Elianne Lindmark

08-12

10-12

Advanced experimental techniques in fluid mechanics

Vilnis Frishfelds

09-01

11-12

Modelling of particulate systems

Gunnar Hellström

10-01

On-going

Free surface and porous media flow

Anna-Lena Ljung

11-01

On-going

Convective heat and mass transfer

 

Paper statistics (2019-11-10)

 

> 300 papers of which 151 accepted in journals with peer review system, 2 Book chapters

Web of Science: No. 146 Times cited = 1838 (1307 wsc)       h-index = 22

Google Scholar: No. 351 Times cited = 3474, i10 index = 89  h-index = 29

 

 

External boards and panels

  • Member of the Swedish National Committee for Theoretical and App Mech, 2003-01-2008-12.
  • Secretary to the Swedish National Committee for Theoretical and App Mech, 2005-01-2008-12.
  • Member of the SICOMP AB board 2003-09-2006-03.
  • Member of Scientific Council, Nanofun-poly European Netw. or Ex. Of 2004-2008.
  • Member of the Permanent Laboratory (A VINNOVA center of excellence) Executive committee 2007-01-.
  • Member of the evaluation panel for Mech Eng, Swedish Research Council 2007.
  • Member of the Int expert group for upstream migrating salmon, Umeriver 2007-2010.
  • Member of Swedish hydro power center steering group on turbines and generators 2009-.
  • Swedish representative in IUTAM's general assembly 2009-.
  • One of eleven PIs in StandUp for energy, 2010-.
  • Member of the Royal Skyttean Academy 2016-.

  • Member of the General Assembly of Hydroflex and H2020 project.

  • Leader of SP4 in EERA JP Hydropower

 

Assessment Committees and other Evaluations

  • Applications to 16 positions at Universities,
  • About 38 PhD theses (in 8 countries),
  • About 10 Licentiate thesis,
  • Applications to the Swedish Research Council,
  • Application to the German Research Foundation and EPSRC UK,
  • Applications to Research Council Norway 2015-2018
  • On-site evaluation of application to National Research Council Canada 2016
  • Aplications to the Netherlands Organization for Scientific Research 2018
  • Reviewer for a large number of journals.
  • The Volvo industrial PhD student programs.

 

 

 

 

 

Internal duties and teaching

  • Member of the course committee for the School of Mechanical Engineering at Chalmers, 2000.
  • Completed LMI-course on Personal leadership November (2003). “Mentor programme” ongoing.
  • Completed three courses on pedagogical developments/supervising students.
  • Contributed to a successful application to a new nursery programme on radiography at Ltu, 2001.
  • Paper on implementation of journals in course in European Journal of Engineering Education.
  • Examiner/lecturer in composite materials, turbomachinery, applied mechanics, hydrodynamics, computational fluid mechanics, advanced fluid mechanics and several PhD courses.
  • Supervisor/examiner of a large numberf of student diploma works.
  • Project co-ordinator of a Nordic project (Nordic Industrial Fund) on composites with 11 industries and 4 institutes, Composites with RTM, 950201-960930.
  • Project co-ordinator of a Nordic project (nordtest) on measurement of the in-plane permeability with 4 partners, 970901-980831.
  • Responsible for research education at the Dep. of App. Phys. & Mech. Eng. about 100 PhD-students 2005-2008.
  • Member of the Executive committee of Dep of App Phys and Mech Eng, LTU 2007-08-2010-12.
  • Member of the Executive committee of Dep of Eng. Sci. and Math, LTU 2011-03-
  • Member of the board of Luleå University of Technology, 2011-02-.
  • Scientific director of the Research and innovation area “Smart Machines and Materials” 2013-04-

Responsibilities at conferences

  • Responsible for “Svenska mekanikdagar” 2007 in Luleå, Head of organisation Commitee.
  • Member of the Scientific Committee for: the 4th Int. Scientific Colloquium on Modelling for Material Processing, Riga, June 8-9, (2006)., the 2nd Int. Symp. on “Nanostructured and Functional Polymer-based Materials and Nanocomposites”, Lyon, France, May 29-31 (2006), the 3rd Int. Symp. on “Nanostructured and Functional Polymer- based Materials and Nanocomposites”, Corfu, Greece, May 13-15 (2007), the 9th Int. Conference on Flow Processes in Composite Materials, Montréal, Canada, July 10-14 (2008), the 6th Int. Scientific Colloquium on Modelling for Material Processing, Riga, Sept 16-17, (2010).
  • Member of the Local Organising Committee for ECCM-13, Stockholm, Sweden, June 2-5 (2008)

 

International Collaborations (examples)

  • Australia: Prof John Sheridan, Monash University, flow down-stream a fish attraction channel, formation of vortices(2010 – present): Prof Graham Nathan University of Adelaide, combustion and flow (2008 – present)
  • Latvia: Prof Andris Jacovics, Latvian University, Docent Vilnis Frishfelds, Leipaja University, flow in porous media (2003-present)
  • US: Prof Jonathan Freund, Univ. of Illinois at Urbana-Champaign fibre orientation (2007 – 2010)
  • Korea: Prof Wook Ryol Hwang, Gyeongsang National University, multiphase flow, 2012-, Prof Dong-Hyan Kim, Gyeongsang National University, multiphase flow, 2012-, wind-power
  • The Netherlands, Prof. Piet Lugt,SKF, Grease Rheology

Private Milestones

  • Married (-99), children (-98), (-00) and (-04)
  • First goal in Senior football-team Burträsk IK, (-83) The Swedish Cup. 1.56.03, 800m, Gävle, (-87). 2.04.43, Lidingöloppet, 30 km, (-89). 6.44.14, Vasaloppet, 90 km, (-95).
  • Asta Kask Jönköping (-84), Roskilde festival, (-86). U2, Josua Tree Tour at the hippodrome in Paris (-87).

Publications

Article in journal

Investigation of a thin permeable layer effect on turbulent flow and passive scalar transport in a channel (2021)

Jouybari. N, Lundström. T
Powder Technology, Vol. 377, s. 115-127
Article in journal

Comparing Internal Flow in Freezing and Evaporating Water Droplets Using PIV (2020)

Karlsson. L, Ljung. A, Lundström. S
Water, Vol. 12, nr. 5
Article in journal

Dynamic Distributed Storage of Stormwater in Sponge-Like Porous Bodies (2020)

Modelling Water Uptake
Lundström. S, Åkerstedt. H, Larsson. S, Marsalek. J, Viklander. M
Water, Vol. 12, nr. 8
Article in journal

Flow and Sediment Behaviours and Morpho-dynamics of a Diffluence−Confluence Unit (2020)

Xie. Q, Yang. J, Lundström. T
Rivers Research and Applications
Article in journal

High-efficiency industrial cyclone separator (2020)

A CFD study
Misiulia. D, Antonyuk. S, Andersson. A, Lundström. T
Powder Technology, Vol. 364, s. 943-953
Article in journal

Investigation of Hydrodynamic Dispersion and Intra-pore Turbulence Effects in Porous Media (2020)

Fallahjoybari. N, Lundström. T, Hellström. J
Transport in Porous Media, Vol. 131, nr. 2, s. 739-765
Article in journal

Investigation of thermal dispersion and intra-pore turbulent heat flux in porous media (2020)

Fallahjoybari. N, Lundström. S, Hellström. J
International Journal of Heat and Fluid Flow, Vol. 81
Article, review/survey

Review of the Numerical Modeling of Compression Molding of Sheet Molding Compound (2020)

Alnersson. G, Tahir. M, Ljung. A, Lundström. T
Part of: Processes
Article in journal

Special issue for flow processing in composite materials (2020)

Lundström. T, Michaud. V
Composites. Part A, Applied science and manufacturing, Vol. 132
Article in journal

A New Technical Concept for Water Management and Possible Uses in Future Water Systems (2019)

Storli. P, Lundström. S
Water, Vol. 11, nr. 12
Article in journal

A Subgrid-Scale Model for Turbulent Flow in Porous Media (2019)

Fallahjoybari. N, Lundström. S
Transport in Porous Media, Vol. 129, nr. 3, s. 619-632
Article in journal

Evaporation of a sessile water droplet subjected to forced convection in humid environment (2019)

Ljung. A, Lundström. S
Drying Technology, Vol. 37, nr. 1, s. 129-138
Article in journal

Experimental study of the internal flow in freezing water droplets on a cold surface (2019)

Karlsson. L, Lycksam. H, Ljung. A, Gren. P, Lundström. S
Experiments in Fluids, Vol. 60, nr. 12
Article in journal

Numerical investigation of a hydropower tunnel (2019)

Estimating localised head-loss using the manning equation
Andersson. R, Hellström. J, Andreasson. P, Lundström. S
Water, Vol. 11, nr. 8
Article in journal

Wall shear stress measurement on curve objects with PIV in connection to benthic fauna in regulated rivers (2019)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. J, Leonardsson. K
Water, Vol. 11, nr. 4
Article in journal

A General Macroscopic Model for Turbulent Flow in Porous Media (2018)

Jouybari. N, Maerefat. M, Lundström. T, Eshagh Nimvari. M, Gholami. Z
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 140, nr. 1
Article in journal

Characterization of Flow Structures Induced by Highly Rough Surface Using Particle Image Velocimetry, Proper Orthogonal Decomposition and Velocity Correlations (2018)

Andersson. L, Larsson. S, Hellström. J, Andreasson. P, Andersson. A, Lundström. S
Engineering, Vol. 10, s. 399-416
Conference paper

Comparison of Hard Floor and Raised Floor Cooling of Servers with Regards to Local Effects (2018)

Wibron. E, Ljung. A, Lundström. T
Part of: Proceedings IECON 2018, 44th Annual Conference of the IEEE Industrial Electronics Society, s. 4887-4892, IEEE, 2018
Article in journal

Computational Fluid Dynamics Modeling and Validating Experiments of Airflow in a Data Center (2018)

Wibron. E, Ljung. A, Lundström. S
Energies, Vol. 11, nr. 3
Article in journal

Effect of Working Parameters of the Plate Heat Exchanger on the Thermal Performance of the Anti-Bact Heat Exchanger System to Disinfect Legionella in Hot Water Systems (2018)

Altorkmany. L, Kharseh. M, Ljung. A, Lundström. S
Applied Thermal Engineering, Vol. 141, s. 435-443
Article in journal

Effects of deswirler position and its centre body shape as well as vortex finder extension downstream on cyclone performance (2018)

Misiulia. D, Antonyuk. S, Andersson. A, Lundström. T
Powder Technology, Vol. 336, s. 45-56
Article in journal

Modelling heat transfer during flow through a random packed bed of spheres (2018)

Burström. P, Frishfelds. V, Ljung. A, Lundström. S, Marjavaara. B
Heat and Mass Transfer, Vol. 54, nr. 4, s. 1225-1245
Article in journal

Modelling the dynamics of the flow within freezing water droplets (2018)

Karlsson. L, Ljung. A, Lundström. T
Heat and Mass Transfer, Vol. 54, nr. 12, s. 3761-3769
Article in journal

Modelling transport and deposition of non-spherical micro- and nano-particles in composites manufacturing (2018)

Holmstedt. E, Åkerstedt. H, Lundström. S
Journal of reinforced plastics and composites (Print), Vol. 37, nr. 8, s. 507-519
Article in journal

Numerical simulations of lubricating grease flow in a rectangular channel with and without restrictions (2018)

Sarkar. C, Westerberg. L, Höglund. E, Lundström. S
Tribology Transactions, Vol. 61, nr. 1, s. 144-156
Article in journal

The Effect of Reynolds Number on Jet in Asymmetric Co-Flows (2018)

A CFD Study
Teng. Z, Larsson. S, Lundström. S, Marjavaara. B
International Journal of Chemical Engineering
Article in journal

Tomographic PIV of flow through ordered thin porous media (2018)

Larsson. S, Lundström. S, Lycksam. H
Experiments in Fluids, Vol. 59, nr. 6
Article in journal

Discrete and continuous modelling of convective heat transport in a thin porous layer of mono sized spheres (2017)

Burström. P, Frishfelds. V, Ljung. A, Lundström. T, Marjavaara. D
Heat and Mass Transfer, Vol. 53, nr. 1, s. 151-160
Article in journal

Effects of the inlet angle on the collection efficiency of a cyclone with helical-roof inlet (2017)

Misiulia. D, Andersson. A, Lundström. S
Powder Technology, Vol. 305, s. 48-55
Article in journal

Experimental and Simulation Validation of ABHE for Disinfection of Legionella in Hot Water Systems (2017)

Altorkmany. L, Kharseh. M, Ljung. A, Lundström. S
Applied Thermal Engineering, Vol. 116, s. 253-265
Article in journal

Experimental study of the flow past submerged half-cylinders (2017)

Bin Asad. S, Lundström. S, Andersson. A
AIP Conference Proceedings, Vol. 1851
Article in journal

Flow in thin domains with a microstructure (2017)

Lubrication and thin porous media
Almqvist. A, Fabricius. J, Lundström. S, Wall. P
AIP Conference Proceedings, Vol. 1798
Article in journal

Heat and mass transfer boundary conditions at the surface of a heated sessile droplet (2017)

Ljung. A, Lundström. S
Heat and Mass Transfer, Vol. 53, nr. 12, s. 3581-3591
Article in journal

Large Eddy Simulation Investigation of an Industrial Cyclone Separator Fitted with a Pressure Recovery Deswirler (2017)

Misiulia. D, Andersson. A, Lundström. S
Chemical Engineering & Technology, Vol. 40, nr. 4, s. 709-718
Article in journal

Lubricating grease flow in a double restriction seal geometry (2017)

a Computational Fluid Dynamics approach
Westerberg. L, Sarkar. C, Farré. J, Lundström. S, Höglund. E
Tribology letters, Vol. 65, nr. 3
Article in journal

Measurements of Transitional and Turbulent Flow in a Randomly Packed Bed of Spheres with Particle Image Velocimetry (2017)

Khayamyan. S, Lundström. S, Hellström. G, Gren. P, Lycksam. H
Transport in Porous Media, Vol. 116, nr. 1, s. 413-431
Article in journal

Modelling the Evaporation Rate in an Impingement Jet Dryer with Multiple Nozzles (2017)

Ljung. A, Andersson. R, Andersson. A, Lundström. S, Eriksson. M
International Journal of Chemical Engineering, Vol. 2017
Article in journal

Numerical Investigation of Turbulent Flow through Rectangular and Biconvex Shaped Trash Racks (2017)

Åkerstedt. H, Eller. S, Lundström. S
Engineering, Vol. 9, nr. 5, s. 412-426
Article in journal

Soot reduction in an entrained flow gasifier of biomass by active dispersion of fuel particles (2017)

Göktepe. B, Umeki. K, Hazim. A, Lundström. S, Gebart. R
Fuel, Vol. 201, s. 111-117
Article in journal

Transitional and Turbulent Flow in a Bed of Spheres as Measured with Stereoscopic Particle Image Velocimetry (2017)

Khayamyan. S, Lundström. S, Gren. P, Lycksam. H, Hellström. G
Transport in Porous Media, Vol. 117, nr. 1, s. 45-67
Article in journal

A Review of Particle Image Velocimetry for Fish Migration (2016)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. G
World Journal of Mechanics, Vol. 6, nr. 4, s. 131-149
Article in journal

A stochastic two-scale model for pressure-driven flow between rough surfaces (2016)

Rafols. F, Larsson. R, Lundström. S, Wall. P, Almqvist. A
Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, Vol. 472, nr. 2190
Article in journal

A validated CFD model for prediction of selective non-catalytic reduction of nitric oxide by cyanuric acid (2016)

Burström. P, Antos. D, Lundström. T, Marjavaara. D
Progress in Computational Fluid Dynamics, An International Journal, Vol. 16, nr. 2, s. 108-117
Article in journal

Active fuel particles dispersion by synthetic jet in an entrained flow gasifier of biomass (2016)

Cold flow
Hazim. A, Göktepe. B, Umeki. K, Lundström. S, Gebart. R
Powder Technology, Vol. 302, s. 275-282
Article in journal

An Experimental Study of Temperature Distribution in an Autoclave (2016)

Kluge. J, Lundström. S, Ljung. A, Westerberg. L, Nyman. T
Journal of reinforced plastics and composites (Print), Vol. 35, nr. 7, s. 566-578
Conference paper

CFD Simulation of Jet Mixing with Asymmetric Co-flows in a Down-scaled Rotary Kiln Model (2016)

Teng. Z, Johansson. S, Larsson. S, Lundström. S, Marjavaara. D
Part of: Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, ASME Press, 2016, IMECE2016-65637
Conference paper

CFD Simulations Comparing Hard Floor and Raised Floor Configurations in an Air Cooled Data Center (2016)

Wibron. E, Ljung. A, Lundström. S
Part of: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, 11-13 July 2016, s. 450-455, 2016
Article in journal

Cold flow experiments in an entrained flow gasification reactor with a swirl-stabilized pulverized biofuel burner (2016)

Göktepe. B, Hazim. A, Gebart. R, Lundström. S
International Journal of Multiphase Flow, Vol. 85, s. 267-277
Conference paper

Comparison of turbulence models when modeling the airflow in a data center (2016)

Wibron. E, Ljung. A, Lundström. S
Paper presented at : European Fluid Mechanics Conference : 13/09/2016 - 16/09/2016
Conference paper

Computational Fluid Dynamics Modelling of Flow Field in a Simplified, Down-scaled Rotary Kiln Model (2016)

Teng. Z, Larsson. S, Lundström. S, Marjavaara. D
Paper presented at : 11th European Fluid Mechanics Conference, Seville Spain, 12-16 Sept 2016
Article in journal

Darcy's law for flow in a periodic thin porous medium confined between two parallel plates (2016)

Fabricius. J, Hellström. G, Lundström. S, Miroshnikova. E, Wall. P
Transport in Porous Media, Vol. 115, nr. 3, s. 473-493
Conference paper

Describing fish passage in a river confluence with telemetry and CFD (2016)

Andersson. A, Leonardsson. K, Lindberg. D, Lundström. S, Hellström. G, Lundqvist. H
Paper presented at : International Symposium on Ecohydraulics : 07/02/2016 - 12/02/2016
Article in journal

Influence of Inertial Particles on Turbulence Characteristics in Outer and Near Wall Flow as Revealed with High Resolution PIV (2016)

Hazim. A, Lundström. S, Hellström. G
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 138, nr. 9
Article in journal

Modeling Transport and Deposition Efficiency of Oblate and Prolate Nano- and Micro-particles in a Virtual Model of the Human Airway (2016)

Holmstedt. E, Åkerstedt. H, Lundström. S, Högberg. S
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 138, nr. 8
Article in journal

Modelling Heat Transfer Inside an Autoclave (2016)

Effect of Radiation
Kluge. J, Lundström. S, Westerberg. L, Nyman. T
Journal of reinforced plastics and composites (Print), Vol. 35, nr. 14, s. 1126-1142
Article in journal

Numerical Computation of Macroscopic Turbulent Quantities in a Porous Medium (2016)

an Extemsion to a macroscopic Turbulent model
Fallahjoybari. N, Lundström. S, Hellström. G, Maerefat. M, Nimvari. M
Journal of Porous Media, Vol. 19, nr. 6, s. 497-513
Conference paper

PIV measurements within a randomly packed bed of spheres (2016)

Khayamyan. S, Lundström. S, Lycksam. H, Gren. P, Hellström. G
Paper presented at : Interpore 2016 : 8th International Conference on Porous Media & Annual Meeting 09/05/2016 - 12/05/2016
Conference paper

Simulation and experiments of entrance flow conditions to a fishway (2016)

Hellström. G, Andersson. A, Leonardsson. K, Lycksam. H, Lundström. S, Lundqvist. H
Paper presented at : International Symposium on Ecohydraulics : 07/02/2016 - 12/02/2016
Article in journal

Simulation of the flow field in an iron ore pelletizing kiln (2016)

Larsson. S, Marjavaara. D, Lundström. S
Minerals & metallurgical processing, Vol. 33, nr. 3, s. 144-148
Article in journal

Smoothed Particle Hydrodynamic Simulation of Hydraulic Jump using Periodic Open Boundaries (2016)

Jonsson. P, Andreasson. P, Hellström. G, Jonsén. P, Lundström. S
Applied Mathematical Modelling, Vol. 40, nr. 19-20, s. 8391-8405
Article in journal

Vacuum infusion of cellulose nanofibre network composites (2016)

Influence of porosity on permeability and impregnation
Aitomäki. Y, Moreno. S, Lundström. S, Oksman. K
Materials & design, Vol. 95, s. 204-211
Conference paper

Velocity distribution measurements in a fishway like open channel by Laser Doppler Anemometry (LDA) (2016)

Bin Asad. S, Lundström. S, Andersson. A, Hellström. G
Paper presented at : Experimental Fluid Mechanics : 17/11/2015 - 20/11/2015
Article in journal

A CFD-based evaluation of Selective Non-Catalytic Reduction of Nitric Oxide in iron ore grate-kiln plants (2015)

Burström. P, Antos. D, Lundström. T, Marjavaara. D
Progress in Computational Fluid Dynamics, An International Journal, Vol. 15, nr. 1, s. 32-46
Article in journal

Calculation of Kiln Aerodynamics with two RANS turbulence models and by DDES (2015)

Larsson. S, Lundström. T, Marjavaara. D
Flow Turbulence and Combustion, Vol. 94, nr. 4, s. 859-878
Article in journal

Compression moulding of sheet moulding compound (2015)

Modelling with computational fluid dynamics and validation
Kluge. J, Lundström. T, Westerberg. L, Olofsson. K
Journal of reinforced plastics and composites (Print), Vol. 34, nr. 6, s. 479-492
Article in journal

Computational Investigation of an Industrial Cyclone Separator with Helical-Roof Inlet (2015)

Misiulia. D, Andersson. A, Lundström. S
Chemical Engineering & Technology, Vol. 38, nr. 8, s. 1425-1434
Article in journal

Effects of the inlet angle on the flow pattern and pressure drop of a cyclone with helical-roof inlet (2015)

Misiulia. D, Andersson. A, Lundström. S
Chemical engineering research & design, Vol. 102, s. 307-321
Article in journal

Evaluation of Guiding Device for Downstream Fish Migration with In-field Particle Tracking Velocimetry and CFD (2015)

Lundström. T, Rahkola. M, Ljung. A, Hellström. J, Green. T
Journal of Applied Fluid Mechanics, Vol. 8, nr. 3, s. 579-589
Article in journal

Influence of plate size on the evaporation rate of a heated droplet (2015)

Ljung. A, Lindmark. E, Lundström. S
Drying Technology, Vol. 33, nr. 15-16, s. 1963-1970
Article in journal

Interaction between the flow in two nearby pores within a porous material during transitional and turbulent flow (2015)

Khayamyan. S, Lundström. T
Journal of Applied Fluid Mechanics, Vol. 8, nr. 2, s. 281-290
Article in journal

Modelling Dam Break Evolution over a Wet Bed with Smoothed Particle Hydrodynamics (2015)

A Parameter Study
Jonsson. P, Jonsén. P, Andreasson. P, Lundström. S, Hellström. G
Engineering, Vol. 7, nr. 5, s. 248-260
Article in journal

Modelling of a groundwater mound in two-dimensional heterogeneous unconfined aquifer in response to precipitation recharge (2015)

Das. S, Ganesh. S, Lundström. T
Journal of hydrologic engineering, Vol. 20, nr. 7
Article in journal

PIV/PLIF experiments of jet mixing in a model of a rotary kiln (2015)

Larsson. S, Johansson. S, Lundström. T, Marjavaara. D
Experiments in Fluids, Vol. 56, nr. 5
Article in journal

The Flow Field in a Virtual Model of a Rotary Kiln as a Function of Inlet Geometry and Momentum Flux Ratio (2015)

Larsson. S, Lundström. T, Marjavaara. D
Journal of Fluids Engineering - Trancactions of The ASME, Vol. 137, nr. 10
Conference paper

The impact of a fixed contact angle on a freezing water droplet (2015)

Karlsson. L, Ljung. A, Lundström. S
Paper presented at : Svenska Mekanikdagar 2015 : 10/06/2015 - 12/06/2015
Conference paper

The influence of a fixed contact angle on a freezing water droplet (2015)

Karlsson. L, Ljung. A, Lundström. S
Paper presented at : Droplets 2015 : 06/10/2015 - 08/10/2015
Article in journal

Turbulent modulation in particulate flow: A review of critical variables (2015)

Hazim. A, Lundström. S, Hellström. G
Engineering, Vol. 7, nr. 10, s. 597-609
Conference paper

Vacuum Infusion of Nanocellulose Networks of Different Porosity (2015)

Aitomäki. Y, Moreno. S, Lundström. S, Oksman. K
Part of: 20th International Conference on Composite Materials, Copenhagen, 19-24th July 2015, ICCM, 2015, 4109-1
Article in journal

Challenges and opportunities within simulation-driven functional product development and operation (2014)

Special Session: Product Development for Through-Life Engineering Services
Pavasson. J, Ljung. A, Karlberg. M, Larsson. S, Johansson. S, Lundström. T
Procedia CIRP, Vol. 22, s. 169-174
Conference paper

Comparison of three turbulence models in the modeling of kiln aerodynamics (2014)

Larsson. S, Lundström. T, Marjavaara. D
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Conference paper

Design of test rig for visualizations of cylindrical shear and pressure driven Couette flow using μPIV (2014)

Li. J, Westerberg. L, Höglund. E, Lundström. T
Paper presented at : International Conference on Experimental Fluid Mechanics : 12/08/2014 - 15/08/2014
Article in journal

Effect of spatial resolution of rough surfaces on numerically computed flow fields with application to hydraulic engineering (2014)

Andersson. A, Hellström. J, Andreasson. P, Lundström. T
Engineering Applications of Computational Fluid Mechanics, Vol. 8, nr. 3, s. 373-381
Article in journal

Enhancing the reliability of laboratory phosphorus filter tests: effect of influent properties and interpretation of effluent parameters (2014)

Herrmann. I, Jourak. A, Hedström. A, Lundström. T, Viklander. M
Water, Air and Soil Pollution, Vol. 225, nr. 1
Article in journal

Experimental investigation of transitional flow in porous media with usage of a pore doublet model (2014)

Khayamyan. S, Lundström. T, Gustavsson. H
Transport in Porous Media, Vol. 101, nr. 2, s. 333-348
Conference paper

Experimental study of the effect from bio-solid particles on fully developed turbulent duct flow (2014)

Hazim. A, Lundström. T, Hellström. J
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Article in journal

Flow-induced deformations within random packed beds of spheres (2014)

Frishfelds. V, Hellström. J, Lundström. T
Transport in Porous Media, Vol. 104, nr. 1, s. 43-56
Article in journal

Gas and particle flow in a spray roaster (2014)

Johansson. S, Westerberg. L, Lundström. T
Journal of Applied Fluid Mechanics, Vol. 7, nr. 2, s. 187-196
Conference paper

Grade of geometric resolution of a rough surface required for accurate prediction of pressure and velocities in water tunnels (2014)

Andersson. R, Andersson. A, Andreasson. P, Hellström. J, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Conference paper

Grate aerodynamic (2014)

Model strategies for gas flow through a 2D iron ore pellet bed
Burström. P, Frishfelds. V, Ljung. A, Lundström. T, Marjavaara. D
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Conference paper

Grease free surface flow on a rotating plate (2014)

Li. J, Westerberg. L, Höglund. E, Lundström. T
Paper presented at : Nordic Symposium on Tribology : 10/06/2014 - 13/06/2014
Conference paper

Influence of internal natural convection on water droplets freezing on cold surfaces (2014)

Karlsson. L, Ljung. A, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014
Conference paper

Influence of internal natural convection on water droplets freezing on cold surfaces (2014)

Karlsson. L, Ljung. A, Lundström. T
Paper presented at : International Symposium on Convective Heat and Mass Transfer : 08/06/2014 - 13/06/2014
Conference paper

Influence of plate size on the evaporation rate of a heated droplet (2014)

Ljung. A, Lindmark. E, Lundström. T
Paper presented at : International Drying Symposium : 24/08/2014 - 27/08/2014
Conference paper

Measurement and simulation of turbulent flow over rough surface (2014)

Sam. A, Andersson. A, Szász. R, Hellström. G, Lundström. S, Revstedt. J
Paper presented at : Nordic Seminar on Computational Mechanics : 22/10/2014 - 24/10/2014
Conference paper

Modeling evaporation of droplets on a heated plate (2014)

Ljung. A, Lundström. T
Paper presented at : European Fluid Mechanics Conference : 14/09/2014 - 18/09/2014