Jerker Delsing
Jerker Delsing

Jerker Delsing

Professor and Head of Subject, Chaired Professor
Luleå University of Technology
Electronic systems
Embedded Internet Systems Lab
Department of Computer Science, Electrical and Space Engineering
Jerker.Delsing@ltu.se
+46 (0)920 491898
A2308 Luleå

History

 

I was born 1957 in Umeå Sweden, received the M.Sc. in Engineering Physics at Lund Institute of Technology, Sweden 1982. In 1985 I received the degree of Licentiate in Technology and in 1988 the PhD. degree, both in Electrical Measurement at the Lund Institute of Technology. During 1985 - 1988 I also worked half-time at Alfa-Laval - SattControl with development of sensors and measurement technology. Over the years 1989-1995 I was at the Department of Heat and Power Engineering at the Lund Institute of Technology where I got the docent degree, May 1994, in Heat and Power Engineering. Early 1995 I was appointed professor in Industrial Electronics at Luleå University of Technology where I am currently the chaired professor in Industrial Electronics at the EISLAB division, http://www.ltu.se/csee/research/eislab. For the period 2004-2006 I was Dean of engineering faculty at Luleå University of Technology.

I have been the main supervisor of more than 40 students achieving the PhD degree.

I'm currently appointed to the board of Artemis, the European industry association for embedded systems. I also serve in the ECSEL SRA working group and also a member of the ESTEP WG on Smart Production. I'm at the board of the Vinnova SIP Smarter Electronics Systems.

Present research profile

My present research profile is focused on IoT, CPS, SoS and SoCPS with applications primarly to industrial automation and digitalization.

In this wast field the following are of particular interest to me:

  • IoT and SoS architectures
  • SoS Engineering
  • Low power electronics and sensors
  • Embedded EMC


Major current projects are:

  • Productive4.0 where I'm WP1 lead on supply chain and product life cycle architecture. Project budget of 100M € with 108 parters
  • Arrowhead Tools, coordinated with me. Overall ambition is commission of engineering tools and integrated tool chains for efficient engineering of automation and digitization of soulitons. Projects have been charged with 91M € and 81 partners.

I'm an addition editor in the Elsevier Journal, Flow Measurement and Instrumentation and a member of the editorial board of the Sensors journal at mdpi. I am also currently a referee for a number of other research journals. Further, I have been a member of the paper and scientific committee of several international conferences. In 1998 I have, as chairman of the organizing committee, arranged the FLOMEKO'98 conference, the world leading scientific conference on flow measurement. In 2001 I was chairman of the organization committee for the Science and Cyber Community conference in Luleå Sweden. I'm also continuously external examiner for dissertations for the PhD. degree and for expert reviews regarding research and chaired professor positions in several countries (Sweden, Finland, Norway, Australia, USA). I also make expert reviews for granting applications in several countries including several EU research programs.

My industrial experience comes mainly from three years at Alfa-Laval Automation - SattControl and two spin-off companies from my research. Further I have been appointed to the board of directors in a number of independent companies as chairmen or board member. Currently I'm appointed to the board of directors in 1 independent companies.

PUBLICATIONS - Awards

1. J. Delsing was 1987 awarded the "Sydkraft Energy research award"
2. J. Delsing was 1993 awarded "Vämeforsk Gas Research Price".

Publications

Article in journal

Efficient Device-to-Device Service Invocation Using Arrowhead Orchestration (2020)

Paniagua. C, Eliasson. J, Delsing. J
IEEE Internet of Things Journal, Vol. 7, nr. 1, s. 429-439
Article, review/survey

Industrial Frameworks for Internet of Things (2020)

A Survey
Paniagua. C, Delsing. J
Part of: IEEE Systems Journal
Article in journal

Security standard compliance and continuous verification for Industrial Internet of Things (2020)

Bicaku. A, Tauber. M, Delsing. J
International Journal of Distributed Sensor Networks, Vol. 16, nr. 6
Article in journal

Autonomous Production Workstation Operation, Reconfiguration and Synchronization (2019)

Garcia Represa. J, Delsing. J
Procedia Manufacturing, Vol. 39, s. 226-234
Conference paper

Evolutionary Architecture and Engineering Concepts for Very Large-scale Sensor-based Solutions (2019)

(Invited Paper)
Delsing. J
Part of: IEEE SENSORS 2019, 2019 CONFERENCE PROCEEDINGS, IEEE, 2019
Conference paper

Generic Autonomic Management as a Service in a SOA-based Framework for Industry 4.0 (2019)

Maksuti. S, Tauber. M, Delsing. J
Part of: Proceedings, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, s. 5480-5485, IEEE, 2019
Conference paper

Interoperability and machine-to-machine translation model with mappings to machine learning tasks (2019)

Nilsson. J, Sandin. F, Delsing. J
Part of: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), s. 284-289, IEEE, 2019
Conference paper

Interoperability automation considered as machine learning tasks (2019)

Nilsson. J, Sandin. F, Delsing. J
Paper presented at : 2nd Productive4.0 Consortium Conference, Budapest, March 12-14, 2019
Conference paper

Realization of Embedded Passives using an additive Covalent bonded metallization approach (2019)

Acharya. S, Chouhan. S, Delsing. J
Part of: 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC), Technical Papers, IEEE, 2019
Conference paper

Scalability of Copper-Interconnects down to 3μm on Printed Boards by Laser-assisted-subtractive process (2019)

Acharya. S, Chouhan. S, Delsing. J
Part of: Proceedings of: 2019 IMAPS Nordic Conference on Microelectronics Packaging (NordPac), s. 206-209, IEEE, 2019